36-72VDC IN, 24V 24W Gigabit Passive PoE OUT, DC to DC Converter and PoE
Injector
PoE Adapter Advantages
► Input Voltage 36-72VDC; Output 24VDC (Passive)
► Integrated Gigabit PoE Inserter
► High Power 24W
► Support 10/100/1000Base-T
► Nominal Frequency 50/60KHz
► High Efficiency > 85%
► Over-Voltage/Load/Temperature & Short Circuit protections
► Plug & Play, no configuration required
► Safe and Reliable Power to WLAN Access Points
► Automatic Detection and Protection of Non-standard Ethernet
Terminals
► Storage Temperature: -20°C to 70°C
Technical Indexes
| Ethernet |
| Standards: | IEEE 802.3 10Base-T Ethernet |
| IEEE 802.3u 100Base-TX Fast Ethernet |
| IEEE 802.3ab 1000Base-T Gigabit Ethernet |
| Processing Type: | Forward |
| Half-duplex, Full-duplex |
| Forward Filter Rate: | 1,488,000pps (1000Mbps) |
| Cabling: | 10/100/1000Base-T: Cat5 or above |
| Maximum Distance: | Cat. 5, 5e, 6 up to 100m (328ft) |
| Connector: | LAN: 1 x RJ-45 STP, “Data” Input Port POE: 1 x RJ-45 STP, “Data + Power” Output Port |
| Environmental |
| Operating Temperature: | -10°C to 50°C (14°F to 122°F) |
| Storage Temperature: | -20°C to 70°C (-4°F to 158°F) |
| Relative Humidity: | 5% to 95% non-condensing |
| MTBF: | >200,000hrs |
| Electrical and Mechanical |
| Input Voltage Range: | 36-72V DC |
| Output Voltage: | DC 24V, 1.0A |
| Power Consumption: | 24 watts max. |
| Passive PoE (Power over Ethernet) |
| Port: | RJ45 |
| Power Pin Assignment | Pin 1,2 / 4,5 (+), Pin 3,6 / 7,8 (-) |
| LED Indicators |
| Power: | Power Status |
| PoE: | PoE Status |
| Dimensions (W×D×H): | 122 x 60 x 40mm |
| Weight: | 0.35Kg |
| Casing: | Plastic Case |
| Mounting Options: | Desktop |
| Regulatory Approvals |
| ISO9001 |
| FCC part 15, Class A |
| EN55022:2006+A1: 2007 Class A |
| Surge Protection: |
| RJ45: 1KV |
| Power: 500W |
| ESD: 4KV/8KV |
Overview
The LNK-DC-P24G is a low cost and high efficiency solution for
those requiring Passive Power over Ethernet from a 36-72VDC voltage
source. They have an integrated POE injector to apply the power and
data output to the CAT5/6 Ethernet cable. The output voltage is
regulated and protected.
They have a common (-) and two (+) for connecting 2 power sources,
such as a primary with a backup power source. A metal enclosure
model is available for industrial applications.
They accept Gigabit data-in to a shielded RJ45 Jack and provide
gigabit data-out and PoE power on the shielded RJ45 output jack. It
works by supplying power on Ethernet pins 4,5(V+) and 7,8(V-). This
converter has various protections for surge, short circuit and
overload. Other models have power outputs up to 24W.
Ordering Information
| Model | Description |
| LNK-DC-P24G | 36-72VDC IN, 24V 24W Gigabit Passive PoE OUT, DC to DC Converter
and PoE Injector |
