Copper tungsten Stud nut welding electrode/Projection welding
electrode
In the projection welding,(such as automotive industrial, bridge
construction), lots of sheet and work piece need be connected by
the nut.
It need good quality nut welding electrode,not only long life time,
but also high strength, high hardness and high wear resistance.
ZT's nut welding electrode use the copper tungsten alloy as
electrode face material to keep the higher wear resistance and big
loading endurance, with Chromium Zirconium copper shank which keep
the higher electrical conductivity and thermal conductivity.
We join the copper tungsten faced and the shank with advanced
technology. There is no any gap between two materials and have high
welding strength.
We also supply the copper tungsten pillar. Customer can join the
pillar to shank by themselves.
Copper tungsten pillar:
We supply the copper tungsten small pillar with varieties size with
tolerance (0, +0.05) as following:
Size
| Dia 1/2"x1/4" | | Dia 1"x3/4" |
| Dia 5/8"x1/4" | | Dia 1-1/4"x1/4" |
| Dia 3/4"x1/4" | | Dia 1-1/8"x1/4" |
| Dia 7/8"x1/4" | | Dia 1-3/8"x1/4" |
| Dia 1"x1/4" | | Dia 1-1/2"x1/4" |
| Material | Density(g/cm3) | Hardness(HRB) | Electrical conductivity(%IACS) | RWMA |
| 75W25Cu | 14.5 | 94 | 45 | 10W3 |
stud welding electrode with copper tungsten face.
Material
| content(%wt.) | density(g/cm3) | hardness(HRB) | Electrical conductivity(%IACS) | Grade | Application |
| Cr:0.6-1% | 8.9 | 85 | 70 | C18200 | shank |
| Cr: 0.5-1.5% Zr:0.05-0.25% Cu:balance | 8.9 | 80 | 80 | C18150 | shank |
| 75W25Cu | 14.6 | 98 | 45 | 10W3 | face |
