High Output Plastic Reyclcing Pellet Machine Singe Step and Double
Step
150 Plastic Recycling Pellet Machine Reference Technical Parameters
I. purpose, features and composition:
The machine is suitable for the recovery of waste materials, PE,
PP, ABS and other broken materials or film material regeneration
granulation, the machine design beautiful and practical, exhaust
effect is good, easy to replace the mesh, so that the machine is
easy to operate and maintain the best quality of recycled
particles.
1. main extruder
2.water flume
3.strong wind dryer
4. Granulator
According to the requirements of processing, the following devices
can be selected:
1. Hydraulic network changing device
2. Water ring molding surface granulation system
3. Air-cooled molding surface granulation system
4. Crusher
5. Pelletizer
6. Air feeding warehouse and dryer
7. Vibrating screen
II. Specifications and technical parameters:
Screw diameter: 150mm
Length-diameter ratio: 22:1
Screw speed: 20-70r/min
Electric mobility: 75KW
Plasticizing capacity: 350-600kg
III. water flume
The water flume is made of stainless steel, 3M long and 0.5m wide
VI. strong wind dryer:
Fan power of 3~4 KW, strong wind, adjustable wind direction, strip
surface water effect is very good, can be packaged directly after
cutting.
V. granulator:
Ql-65 granulator matched with sj-150 host machine has the
characteristics of strong power, new design, easy loading and
unloading, and easy cleaning. The technical parameters are listed
in the following table:
Motor power: 5.5kw
The maximum output is 600Kg
The width of the moving tool is 200mm
The diameter of the strip is 2~5mm
The particle length is 3mm
Maximum feed (root) 50
The moving tool shaft of this equipment is double support of gantry
type, which ensures the rotating precision and stability of the
moving tool, and keeps the pulsation of the outer circle of the
moving tool within 0.03mm. The moving tool is an integral tool,
which forms an integral component with the cutter shaft and
bearing, and is easy to disassemble and install.
Cylinder action is controlled by solenoid valve, high degree of
automation, low noise, with the appropriate device noise can even
be lower than 50 db, when the strip temperature is too high, can be
equipped with cots forced cooling device, cots service life longer.
The speed regulation mode of the granulator is variable frequency
speed regulation, which can quickly adjust the speed of granulator
according to the discharge speed of the main machine and is easy to
realize continuous and stable production.
VI. Vibrating screen:
The vibrating screen is used to separate the granules after
granulation.
The vibrating screen is divided into three layers, and the granules
larger than the standard size, smaller than the standard size and
equal to the standard size are screened separately, which is
convenient for collection, bagging and recycling.
(optional)
