Stainless Steel 304 Material Ro Water Treatment System / Water
Purification Equipment
Detail Introduce
Water treatment:
1, desalt rate ≥99
2, capacity: 500-50000LPH
3, material: 304 S.S
4, Conductivity≤20
Jiayuan Reverse Osmosis RO System Water Treatment is for producing
drinking water, foods factory, beverage factory, fruit& vegetable
factory etc. The machine is integrated into a group, the assembly
and transportation are rather convenient.
It's simply operation and has long lifespan.
Main components: RO membrane(Hydecanme),
high pressure pump(NANFANG China)
Electricity conduction meter
Over high or over low pressure protection failities
304 Stainless steel
Suitable for investment for mid-scale enterprises
The standard of supplied water
Electricity conduction rate: Nor more than 10us/cm
Bacteria no.: Not more than 20
Installation:
Raw water pump+quartz and sand filter +active carbon filter +sodium
ion filter + precision filter +high pressure pump +RO system+Ozone
generator+water storage tank.
Plant process:
1. Raw water pump-- provide the pressure to silica sand
filter/active carbon filter
2. Quartz and Sand filter-- get rid of turbidity, suspended matter,
organic matter, colloid and so on
3. Active Carbon filter--Remove the color, free chloride, organic
matter, harmful matter and so on
4, Sodium ion filter--reduce the hardness of water
4. Precision filter--prevent any deposition of large Particles,
most of the bacteria, and viruses into the RO membrane, The
accuracy is 5um, for holding back any large particulates such as
large iron, dust, suspended matter, impurity.
5. High pressure pump-- Provide the high pressure to RO membrane(at
least 2.0 Mpa).
6. RO system--RO system is the main part of pure water treatment
plant. The RO membrane's desalt rate can reach as high as 99%, it
is capable of removing over 99% of ions, bacteria, particles and
98% of organic.
Parameters
1. Operating Pressure: < 300 psig
2. Maximum Recovery: 50% - 75%
3. Nominal Rejection: 95-99%
4. Operating Temperature: 2-35 ºC
5. Minimum Inlet Pressure: 30 psig
6. Design Temperature: 25 ºC
