Single Disc Metallographic Sample Pre-grinding Machine Fixed Speed
450rpm M-1
Technical Specifications:
| Diameter of Grinding Disc | Standard φ203mm (other specifications customized) |
| Rotating Speed of Grinding Disc | 450r/min |
| power supply | Voltage: 220V Frequency: 50HZ |
| Motor | 0.37KW |
| Appearance size | 730×420×320mm |
| weight | 31Kg |
Brief Introduction:
In the process of metallographic sample preparation, sample
grinding is an essential process. The grinding of the sample is
generally divided into two processes: coarse grinding and fine
grinding.
The purpose of coarse grinding is to obtain a flat surface, which
is generally done on a grinder, and there are still deep marks on
the surface of the sample. The purpose of fine grinding is to
eliminate these grinding marks to obtain a flat and smooth grinding
surface, which is ready for the next step of polishing.
The iqualitrol M-1 metallographic sample pre-grinding machine can
be used for fine grinding of metallographic samples. The shell
adopts integral blister, novel appearance, stable rotation, low
noise, convenient operation, high work efficiency, etc., and comes
with cooling
The device can cool the sample during grinding to prevent the
metallographic structure from being damaged due to overheating of
the sample. It is suitable for metallographic laboratories of
factories, colleges and universities, and scientific research
units. It is an excellent equipment for pre-grinding metallographic
samples.
Main Functions and Features:
1. The shell is made of high-end ABS, which has a novel appearance
and high-end atmosphere;
2. The faucet adopts all-copper chromium plating process, which has
good corrosion resistance;
3. Economical and affordable, durable.
