220V/380V Motion Control Servo Drive Amplifier For Injection
Molding Machine
Products Description
| Product Name | Motion Control Servo Drive Amplifier |
| Brand | Vector |
| Model No. | VEC-VC-00323H-M-E |
| Power4 | 0.4KW |
| Input | Pulse/Analog |
| Voltage | 220V |
| Phase | Single/Three Phase |
| Rated Current | 3A |
| Communication Protocols | Modbus/CANopen/EtherCAT |
| Encoder | 12500 pulse incremental + Hall encoder; |
| E structure servo driver panel |
There are a total of four operating modes, namely status display,
parameter reading and
writing, variable monitoring, and functional operation. |
| Panel operation mode | mode introduction |
| Status display | Displays the status of the drive, such as reset (panel display
rst), ready (panel display rdy), run (panel display run), fault
(Er.xxx), or monitor a specific variable in the run (eg speed,
busbar) Voltage, etc.) |
Parameter reading and
writing | Reading and writing all parameters |
| Variable monitoring | Monitors a variable or IO state of a drive |
| Function operation | Perform specific functions, such as jog test run, parameter reset
factory value, driver reset |
The panel contains 5 buttons and 5 digital tubes.
The general functions of the five buttons are shown in the table
below.
| Key Name | Key function | | Mode | mode switch, return to the previous menu | | ▲(add) | increase flashing bit value of the LED digital tube | | ▼(dec) | Decrease flashing digit value of the LED digital tube | | ◄◄(shift) | Moves the blinking LED tube to the left; checks the high value of
data
longer than 5 bits; Fault reset;execute Fn function | | SET | read/write parameter values |
|
Other Questions:
Q1. How to select the suitable model?
A: Please confirm your requirements for Rated Power, Current,
Voltage, Torque and select the suitable model based our model list;
Q2. How to set the programming system?
A: Our Servo drive support the Global Communication protocols:
Modbus/CANopen/EtherCAT, Please Just make the programming follow
your experiences;
Q3. What's the power range about our servo system?
A: Our Power range covers 0.2-110KW, reach your requirements;
Q4. What's the encoder feedback interfaces we using?
A: We have multiple Encoder feedback interfaces, like :
incremental/wire-saving encoder, 17-bit/23-bit/24-bit absolute
encoder, resolver encoder, etc.
Certificates
1. CE (EU Safety Standard);
2. IEC/EN61800-5-1:2007 (Safety requirements for electrical,
thermal and energy in Section 5-1 of
the variable speed electric driver system), corresponding to the
national standard GB12668.501-2013;
3, IEC / EN61800-3: 2004 + A1 (speed control electric driver system
part 3 electromagnetic compatibility
standards and its specific test methods), corresponding to the
national standard GB12668.3-2012.
Quality Checking:
Four times Production testing
Two Times 24 hoursTesting
100% Inspection Before Shipping
Delivery Time and Shipping Way
1. For small order we always can delivery out within 1 week.
2. Our products can be shippied via Air, Land or Sea.
| Quantity | 1-5 kits | 50-100 kits | 200-500 kits |
| Delivery time | Within 3 days | 5-10 days | 15-25 days |
| Packing details of Servo Drive |
| Products | E1(3-6A) | E2(7-12A) | E3(16-27A) |
| Ctn. Size | 280*208*78 | 280*208*112 | 375*290*155 |
Our Team:
