Gravity Casting Induction Copper Melting Furnace
1. General description
The gravity copper casting furnace adopts the two melting pool
design and the two induction body structure.
The advantages of this structure are to balance the temperature of
the melting pool and all parts of the
furnace to achieve the energy-saving. This induction melting and
holding furnace is a continuous type,
and has one melting chamber and one holding chamber separately.
Name: 500kg/h power frequency cored induction casting furnace
Purpose: melting qsn65 ~ 1.0 tin bronze, red copper and brass
ingots.
Copper Casting Furnace for Gravity Casting Process:
2. Main technical data
Total power: 130 ~ 150KW Daily output: 9-10t (24h working); Rated capacity: 0.5T Minimum capacity (i.e. melting weight): 0.5T Rated total capacity: 1.5T ~ 1.8T Rated power: 130kW Power supply power: 240kVA Rated voltage of inductor: 380V Number of inductor phases: 1 Sensor connection method: Y Inductor frequency: 50Hz Melting rate: 0.5t/h Unit power consumption: 130kwh / T holding power: 75KW Rated working temperature: 1250 ℃ Power factor: ± 0.9-1 (after compensation) Cooling water consumption: 6t / h |
3. Installation
3.1 The copper induction melting furnace foundation provided by the
manufacturer is only for users' reference.
3.2 The installation dimension of each equipment shall be checked
with the physical object, and the embedded iron
shall be reserved on the foundation drawing.
3.3 Check according to the waterway system, the waterway shall be
unobstructed, and all pipe joints shall be free
of leakage.
3.4 Connect the cable of the inductor and check whether the
waterway and circuit connection are correct.
3.5 The insulating plate at the opening of the water-cooling jacket
of the cooling inductor must be installed to prevent
the water-cooling jacket from forming a closed loop.
3.6 When assembling the iron core, use the adjusting screw of the
furnace frame to make it reach the central position.
