Two Chamber Induction Copper Melting Holding Furnace , Industrial
Induction Furnace for Gravity Casting
1. General description
The gravity copper casting furnace adopts the two melting pool
design and the two induction body structure.
The advantages of this structure are to balance the temperature of
the melting pool and all parts of the furnace to
achieve the energy-saving. This induction melting and holding
furnace is a continuous type, and
has one melting chamber and one holding chamber separately.
3D drawing of Water Cooling Type Induction Copper Casting Furnace
for Gravity Casting
AIR COOLING TYPE 2-CHAMBER INDUCTION COPPER MELTING FURNACE (furnace body could be
of air or water cooling type, and control cabinet of air cooling
type)
2. Equipment features
2.1 The electrical part adopts the brand CHINT Electric.
Three-phase balance device is adopted for
electrical cabinet. The transformer and reactor adopt dry
self-cooling to avoid accidents caused by scaling
in areas with hard water quality.
2.2 The silicon steel sheet is imported from Japan with a thickness
of 0.35mm. Effectively improve the
electric heating efficiency.
2.3 The electric copper induction melting furnace shell shall be
treated with stress removal to ensure that
the shell will not deform after being heated.
2.4 The induction melting furnace adopts new technology to
effectively reduce energy consumption and improve ingot quality.
3. Supply Scope of copper melting furnace
| No. | Item | Q’ty | Remark |
| 1 | Casting furnace shell | 1 set | Stress removal treatment |
| 2 | Refractory material | 1 set | For single furnace building |
| 3 | Stainless water jacket | 2 pcs | 1Cr18Ni9Ti(321) |
| 4 | Induction coil | 2 pcs | |
| 5 | Induction iron core | 2 pcs | Z10, Imported from Japan |
| 6 | Molten groove | 2 pcs | Alloy copper |
| 7 | 120KW electrical cabinet | 1 set | 3P balance , dry type |
| 8 | 80KW electrical cabinet | 1 set | 3P balance , dry type |
| 9 | Temperature control | 1 set | |
