Advanced Temperature Control , Furnace Brazing Furnace , Energy
Saving
This mesh belt continuous gas aluminum brazing furnace is mainly
used for aluminum and iron, stainless steel and aluminum plate,
copper etc, . After such equipment treatment, the product surface
becomes bright without oxidation.
The furnace boasts stylish design, rational structure, energy
saving, high heat efficiency, stable production quality, safe and
easy use, not generating industrial pollution.
Advanced temperature control manners: Intelligent thermostat and
silicon controlled rectifier ensure temperature control precision
of ±1℃. It’s advanced, reliable, practicable and cost effective as
an industrial furnace.
The degreasing furnace is heated by natural gas or electricity. The
oil on the core will be removed by stir fan through circulating hot
air. During this process, the lubricating oil will be
evaporated,then burning in the incinerator. The temperature control
of this furnace is adjusted by PID. Within the width of mesh-belt,
the temperature uniformity will be within ±10.
The final exhaust gas is below 300°C, the screw blades are designed in the muffle to acieve dwell time
(1s at least) and 95% splitting efficiency. Before entering the
combustion chamber, the exhaust gas from degreasing furnace must be
transferred by heat exchanger, and the temperature of exhaust gas
after heat exchange is not lower than 400°C. The heat efficiency is
more than 50%.
The pre-heating furnace is connected to the inlet curtain box and
heated by natural gas. Within the width of whole belt, the furnace
temperature uniformity will be within ±5°C(Based on the same section of the moving section). The temperture
divation of core will be within ±2°C.
