1500BPH 0-2L Fully Automatic Glass Bottle Fruit Juice Beverage Hot
Filling Machine Washing Filling Capping Line Plant with TWIST OFF
Screw Cap
Rotary bottle washer
Principle:
This washer is developed on the basis of digesting and absorbing
advanced technology introducing from abroad and is with
international advanced level. It is mainly used for rising for 1st
hand PET or glass bottles.It is advanced in construction , steadily
in performance, safe in operation , easy in maintenance high in
production efficiency, and the speed can be regulated infinitely.
The rinser is the ideal choice for drink factories of small and
middle size. The bottles will be taken into rinser by conveyor, the
dia plate will turn each bottle to be caught by spring clamp, with
driven energy of motor, the spring clamps will go forward a circle
along main axis, the bottles will be reversed 180°,bottle mouths
will be facing to floor, and at the meantime, spray water value
will be open and clean pressure water will spray inside bottles,
with the water fall down, dirty inside bottles will be taken away.
Then the cleaned bottle will be turned 180°again and sent into next
machine station. The whole machine is made of SUS304. The spring
clamp is by Italian design, can be slightly adjustable according to
bottle neck size difference and can protect bottle neck. And water
spray system is from American, make sure water spray averagely.
Easy for clean and maintenance.
Parameters:
Rising heads: 12 pcs
Capacity: 0-3000BPH (each bottle rinsing time 4s)
Power: 0.92KW
Dimension: 1050*1050*1900mm
Weight: 450KG
Applicable bottle: D∮50-100mm,H 50-350mm
Hot Filling Part
1)This filler is developed on the basis of digesting and absorbing
advanced technology introducing from abroad and is with
international advanced level. It is mainly used for filling hot
temperature drink.It is advanced in construction , steadily in
performance, safe in operation , easy in maintenance high in
production efficiency, and the speed can be regulated infinitive.
The filler is the ideal choice for drink factories of small and
middle size.
2)The bottles will be taken into filler by conveyor, the dia plate
will turn each bottle to be caught by holding clap, with driven
energy of motor, the holding claps will go up and down as main
axis, when clap hold bottle, it will go up to press bottle mouth
closely to filling head, at the meantime, filling value open and
start to fill, when the bottle mouth leave the filling head,
filling stop.
3)The whole machine is made of SUS304. The filling head is spring
type without dead angel, no dripping. Easy for clean and
maintenance. The holding clap model is suitable for all bottles
with same bottle neck, it is easy for change bottle shape and
volumes. The filling valve is set with CIP rinsing cups;
| Model : | RG -12 |
| Production Capacity: | 2000b/h |
| Bottle /standard: | PET bottle |
| Applicable bottle: | D=Ø50~ Ø100mm,H=160~320mm |
| Filling Temperature | 65-80 ℃ |
| Power: | 1.85kw |
| Overall Dimensions: | 1100*1100*1800mm |
| Weight : | 550KG |
Backflow device
Principle:
The juice enters the filling machine to start filling after
reaching the technological requirements through the UHT (Ultra High
Temperature Instantaneous Sterilization) system. The function of
the backflow device is to ensure that the filling volume of each
bottle is on a uniform level. If there is a liquid level that
exceeds the specified level, the backflow pump will start vacuuming
and extract the excess liquid into the front UHT sterilization tank
for high-temperature sterilization,then back to the filling link.
Parameters:
Backflow tank size:100L
Vacuum pump power:1.1KW
Backflow pump power:0.75KW
Capping Part:
General specifications:
The capping head is by Italian magnetic technique, it will protect
caps not to be destroyed. The capping correctness will be 99%. The
opposite caps will be deleted automatically. The capping head is
with clockwise and anti clockwise rotation function, it will make
sure the cap screw fitting well into neck screws .The whole machine
is made from SUS304, long shelf time.
Parameters:
| Capacity | 0-2000BPH |
| Capping head | 1 PC |
| Applicable bottle | glass bottle |
| Applicable bottle height | 120mm-320mm |
| Applicable bottle diameter | Φ50mm-Φ100mm |
| Applicable cap | TWIST OFF Screw |
| Cap Bottle mouth diameter | Φ22mm-Φ32mm |
| Main motor power | 0.95KW |
| Dimension | 1130*900*2500mm |
| Weight | 800kg |
Application:
