Silicon Carbide Grit Sand Cloth Roll P12~P240 Grit 1400mm / 54''
Width
WEEM 1126-22 Floor Sanding Rolls are designed for floor sander
machines, like: Squar-Buff, Clarke, Deva, Silver Line, Floorking
M101-24 and so on.
Description:
With more than two-decade experience in panel sanding, we know very
well of the requirement. We have kept all aspects in mind and
develop a good balance between performance and value product for
this field - WEEM 1126 SIC Y-CLOTH ABRASIVE. It is built with fast
cut silicon carbide gain, resin over resin, close coated on
durable, and stiffness Y-wt waterproof polyester backing. It offers
good performance on MDFs, particleboards, plywood, man-made board,
etc, while remaining at a good value to the user.
Silicon carbide is a very hard and crystal structure that produces
a fine straight-edged grind line. It is superior for its ability to
penetrate with light cutting pressures. SiC is primarily used for
grinding nonferrous materials such as brass, copper, bronze, and
wood, glass, rubber, and plastics. It is also used to finish
polyurethanes, primers, lacquers, and sealers.
A closed coat product has a higher number of abrasives cutting
points per square inch and results in a higher stock removal rate
and a long time before the abrasive wears out. Normally results in
a better finish.
Applications:
Woodworking /MDF/HDF/OSD/Partial board/Chip board/Glass/metal
Specifications:
| Backing: | Y-weight polyester |  |
| Treatments: | Antistatic |
| Coated: | Close coated |
| Bond: | Resin over resin |
| Grain: | Silicon Carbide |
| Grit: | P12~P20(custom order)P36~P240 |
| Jumbo Width: | 1400mm/54” |
Competitive Advantage:
Standard durable stiffness polyester abrasive, efficient grinding
in woodworking, can be widely use on MDF/HDF, OSB board sanding,
and glass sanding, etc.
Tag:
Cloth abrasive, silicon carbide, Sic, sanding cloth jumbo roll
