Industrial 5G 95W 802.3bt PoE++ Injector (12~48VDC)
PoE Injector Splitter Advantages
► 1 RJ45 Ethernet Data Input Port + 1 RJ45 Power over Ethernet
Output Port (Data + Power)
► Support 95W LTPoE++ Power Sourcing Equipment
► Complies with IEEE 802.3at/bt PoE end-span/mid-span PSE
► Support 10/100/1000/2.5G/5G/10G Base-TX
► Extensive LED indicators for PoE diagnostics
► 12~48V DC wide range power input with power booster function
► Up to 95-watt PoE budget (48VDC), 95-watt PoE budget (24VDC),
60-watt PoE budget (12VDC)
► Supports DIN-Rail and Wall-mount installation
► Environmentally Hardened -40°C to 80°C (-40°F to 176°F) operating
temperature
Technical Indexes
| Ethernet |
| Standards: | 10/100/1000/2.5G/5G/10G BASE-T Ethernet |
| Processing Type: | Forward |
| Half-duplex, Full-duplex |
| Forward Filter Rate: | 14,880,000pps (10Gbps) |
| Cabling: | 10/100/1000/2.5G/5G/10G BASE-T: CAT7 or above |
| Maximum Distance: | CAT7 UTP up to 30m |
| Connector: | 2x RJ45 |
| Environmental |
| Operating Temperature: | -40°C to 80°C (-40°F to 176°F) |
| Storage Temperature: | -40°C to 85°C (-40°F to 185°F) |
| Relative Humidity: | 5% to 95% non-condensing |
| MTBF: | >200,000hrs |
| Electrical and Mechanical |
| Input Power: | 12~48VDC (Terminal Block) |
| Power Consumption: | 100W Max. |
| Power over Ethernet: |
| Standard: | IEEE 802.3bt 4-pair Power over Ethernet |
| IEEE 802.3at Power over Ethernet Plus |
| IEEE 802.3af Power over Ethernet |
| Port: | RJ45 |
| Power Pin Assignment | Data provide over pairs 1,2TX and 3,6RX Power over spare pairs 1,2,4,5(+) and 3,6,7,8(-) |
| PoE Budget: | Up to 95-watt PoE budget (48VDC) Up to 95-watt PoE budget (24VDC) Up to 60-watt PoE budget (12VDC) |
| LED Indicators: |
| Power: | Power Status |
| PoE: | PoE Status |
| Dimensions (WxDxH): | 95 x 70 x 30 mm |
| Weight: | 0.25Kg |
| Casing: | IP40 Aluminum Case |
| Mounting Options: | DIN-Rail / Wall-mount |
| Standard Accessories |
| Package Contents | LNK-INJ601-90 |
| User's manual |
| Wall-mount kit |
| DIN-mount kit |
| Regulatory Approvals |
| ISO9001 |
| FCC part 15, Class A |
| EN55022:2006+A1: 2007 Class A |
| Surge Protection: |
| RJ45: 1KV |
| Power: 500V |
| ESD: 4KV/8KV |
Overview
The LNK-INJ601-90 product is an Industrial hardened single-port
PoE+ IEEE 802.3bt / LTPoE++ 95W 10/100/1000/2.5G/5G/10G Base-TX PoE
Injector with 12~48V DC Input and Voltage Booster. It allows you to
connect the PoE device such as camera and access point with a non
PoE LAN switch within the distance of 30m. Both the Ethernet port
(to switch) and the PoE Out port (to PoE device) support
10/100/1000/2.5G/5G/10G Base-T and are compliant with IEEE 802.3ab.
It provides 95W PoE output.
Ordering Information
| Model | Description |
| LNK-INJ501-90 | 5G Hardened 1-port Ethernet Input + 1-port 95W PoE++ Output
Injector with 12~48V DC wide range power input |
| Mounting Options | ► Default DIN-Rail Bracket installed; Wall Mount Bracket is
included. |
| Power Options | ► 120W/2.5A 48VDC Power Supply. Open Wire for Terminal Block |
| ► Power Supply is to be purchased separately. |
