Product Description
M15B M15M Hight Theta Heat Exchanger Plate With Gasket For Optimal
Cooling
Heat Exchanger Plates
Heat exchanger plates are components used in plate heat exchangers,
which are devices designed to transfer heat from one fluid to
another. These plates are typically made of metal and are arranged
in a way that allows for efficient heat transfer between the two
fluids while keeping them physically separated.
The need for heat exchanger plates arises from the requirement to
efficiently transfer heat between two fluids without allowing them
to mix. This is important in various industrial, commercial, and
residential applications where the transfer of heat is essential
for processes such as heating, cooling, and thermal energy
recovery.
The key reasons for using heat exchanger plates for heat transfer
include:
1. Efficient Heat Transfer: Heat exchanger plates are designed to
maximize the surface area available for heat transfer between the
two fluids, resulting in efficient and rapid thermal exchange.
2. Compact Design: Plate heat exchangers with heat exchanger plates
offer a compact and space-efficient solution for heat transfer
compared to traditional shell-and-tube heat exchangers.
3. Versatility: Heat exchanger plates can be configured in
different patterns and designs to accommodate various fluid types,
flow rates, and temperature differentials, making them versatile
for a wide range of applications.
4. Energy Efficiency: By facilitating efficient heat transfer, heat
exchanger plates contribute to energy savings and improved process
efficiency in heating and cooling systems.
| Brand | Model |
| M3,M6,M6-D,M6M,M6MC,M10B,M10M,M15B,M15M,M15MC,M20M M20B,MX25B,MX25M,M30,TS6,TL6B,TS20,TL10B,TL10P,T20B,T20M, T20P,TL35B P16,P26,P36,AK20,JWP26,JWP36,M6MW,M10BW,MK15BW |
| Material | Specification |
| Stainless Steel | SUS304 316 316L 310S 904 |
| Titanium and titanium-palladium alloy | TAi TAi-Pd |
| Hastelloy | C276 D205 B2G |
| Nickel | Ni200 Ni201 |
| Molybdenum | 254 |
Products are mainly suitable for ACCESSEN/GEA (Kelvion)/ APV/
Sondex/ Tranter/ Hisaka/ API/ Funke/ Vicarb/ Mueller/ SWEP/
Fischer/ AGC/ Thermalwave/ ITT/ LHE/ DHP, etc.
Applacations
| Plate material | Suitable for fluids |
| Stainless steel (SUS304.316, etc.) | Purified water, river water, edible oil, mineral oil |
| Titanium and titanium palladium (Ti, Ti-Pd) | Sea water, salt water, salt compounds |
| 20Cr,18Ni,6Mo(254SMO) | Dilute sulfuric acid, dilute salt aqueous solution, inorganic
aqueous solution |
| Nickel (Ni) | High temperature, high concentration caustic soda |
| HASTELLOY alloy (C276, D205, B2G) | Concentrated sulfuric acid, hydrochloric acid, phosphoric acid
|
Plate heat exchanger plate thickness configuration
- AISI 304 is usually 0.4 or 0.5 mm thickness
- AISI 316 is always 0.5 and 0.6 mm
- 254 SMO (high alloy) typically 0.6 mm
- Titanium plates are always 0.5 and 0.6 mm
- Some have thicker plates (for high pressure applications)
- Some PHEs have 0.4 mm (low pressure operation)
- Hastelloy C-276 (nickel alloy) typically 0.6 mm
Production Process:
- Raw material preparation: High-quality stainless steel plates are selected as raw materials
due to their excellent corrosion resistance and thermal
conductivity. The plate thickness is determined based on product
specifications and design requirements.
- Cutting and leveling: The stainless steel plates are accurately cut using machine tools
to meet the design requirements. After cutting, leveling treatment
is performed to ensure a smooth and even surface.
- Stamping: The flattened plates undergo stamping using a hydraulic press to
create specific herringbone patterns. The resulting plates have a
high turbulence coefficient, promoting efficient heat transfer.
Precise control is maintained during the stamping process to
prevent plate deformation or damage.
- Surface treatment: The plates undergo surface treatment such as polishing,
sandblasting, or coating to enhance corrosion resistance and heat
transfer performance. The choice of treatment method depends on
specific requirements.
- Assembly and inspection: The plates are assembled according to the design requirements,
forming a detachable plate heat exchanger with rubber gasket seals
or a fully welded plate heat exchanger through argon arc welding.
Tight fitting and absence of gaps are ensured during assembly. A
rigorous performance pressure test is conducted after assembly, and
a factory report is issued to verify compliance with quality
standards.
