BPHT24 Pressure Transmitter Sensor
Introduction of flush diaphragm pressure Transmitter sensor :
The BPHT24 flush diaphragm pressure transmitter sensor has a
threaded design and a flat membrane construction. The sanitary
pressure transmitter is a sanitary pressure transmitter suitable
for food process measurement. Its flush pressure interface can be
achieved by means of inch threads or clamps and sanitary tubes,
which are composed of clamps and sanitary tubes. BPHT24 pressure
transmitter is widely used in food, pharmaceutical, brewing,
fermentation and other industries. Divided into conventional type,
high temperature heat dissipating type, card insert flat film type,
clamp oil filled type (sanitary type), clamp flat film type, flush
film type, all stainless steel type.
Product Features of flush diaphragm pressure transmitter sensor:
1. Various pressure interface options.
2. Designed for hygienic applications to prevent medium scaling.
3. High accuracy with a fully stainless steel structure.
4. Easy to clean.
Applications of flush diaphragm pressure transmitter sensor:
- This product is designed for measuring non-corrosive gases and
liquids using 316L material.
- It is particularly well-suited for applications in the
environmental protection and chemical industries.
- The product is also widely used in marine and aviation industries
due to its high reliability and accuracy.
- In addition, this pressure transmitter is ideal for use in medical,
biopharmaceutical, and food hygiene industries where precision and
cleanliness are of utmost importance.
| Performance Parameters of flush diaphragm pressure transmitter sensor |
| Measurement Range | 0~35Kpa…~20MPa |
| Pressure Type | Gauge Pressure, Absolute Pressure, Sealed Pressure |
| Overload | ≤ 1.5 times of the rated range |
| Accuracy @ 25ºC | ±0.25% (Typical) ±0.5% (Maximum) |
| Repeatability& Hysteresis | 0.02%F.S(Typ.) 0.05%F.S(Max.) |
| Long-Term Stability | ±0.1%F.S/Year(Typ.) ±0.2%F.S/Year(Max.) |
| Zero Point Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
| Full Scale Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
| Frequency Response | 2.4Khz |
| Compensation Temperature | 0-70ºC(≤10mpa,customizable) |
| Operating Temperature | -20ºC~80ºC |
| Storage Temperature | -40ºC~120ºC |
| Vibration | 10g,55Hz ~ 2kHz |
| Housing Material | 304,316L |
| Diaphragm Material | 316L |
| Insulation Resistance | 100MΩ 100VDC |
| Explosion-proof Rating | Ex ia IIC T6 Ga |
| Protection Rating | IP65 |
| O-Ring Seal | Fluoro rubber |
| Weight | ~0.2kg |
| Output Signal | Supply Voltage | Output Type |
| 4~20mA | 12~30VDC | 2/3/4 wire |
| 0~10/20mA |
3 wire |
| 0/1~5V |
| 0/1~10V |
| 0.5~4.5V | 5VDC |
| RS485 Communication Protocol | 3.6~30V / Battery | 4 wire |
- Please ensure that the tested medium is compatible with the
product's contact part before making a selection.
- Note that explosion-proof products do not come with digital display
heads when placing an order.
- When ordering a transmitter with an LCD or LED display head, ensure
that the power supply is not less than 20VDC.
- For reliable operation, it is recommended to install lightning
protection devices in the field and ensure proper grounding of the
product and power supply.
- The rated operating temperature range of the fluorine rubber O-ring
is -20℃ to 250℃. If the operating temperature is below -20℃, please
choose an EPDM O-ring.
- The default cable length is 1.5m, and there are three cable
materials to choose from. If no special instructions are given,
polyethylene cable material will be used. If you require a
different cable material, please specify it in the order.
- If there are special requirements such as strong vibration,
instantaneous impact force, or strong electromagnetic or RF
interference, please inform us and indicate it in the order.
| Order Guide of flush diaphragm pressure sensor |
| BPHT24 | Pressure Transmitter |
| Code | Outline Construction |
| IX | Display Pressure Transmitter | IIC/III | Industrial General/ Display Pressure Transmitter |
| T | High-temperature resistant Pressure Transmitter | | |
| Measurement Range | 0~35Kpa…~20MPa |
| (0-X)Kpa or MPa | X: Indicates the Actual Measuring Range |
| Code | Power Supply |
| D1 | 24VDC |
| D2 | 5VDC |
| D3 | Other |
| Code | Output Signal |
| S1 | 4~20mADC | S5 | 0~20mADC |
| S2 | 1~5VDC | S6 | 0~10VDC |
| S3 | 0~5VDC | S7 | 0.5~4.5VDC |
| S4 | 0~10mADC | | |
| Code | Pressure Connection |
| J1 | M20×1.5 |
| J2 | G1/2 |
| J3 | G1/4 |
| J4 | 7/16-20UNF |
| J5 | Other |
| Code | Electrical Connection |
| B1 | Hirschmann |
| B2 | PG7 Plug |
| B3 | Sealed Cable Output |
| B4 | 2088 Industrial Casing |
| B5 | 2088 Industrial Casing with Display |
| B6 | Other |
| Code | Pressure Type |
| G | Gauge Pressure |
| A | Absolute Pressure |
| S | Sealed Reference Pressure |
FAQ:
Q1: Are you a manufacturing company?
A1: Yes, we are a manufacturing company with over 29 years of
experience.
Q2: Customized Products
A2: We offer OEM and Custom-Design services to meet your specific
requirements.
Q3: Quality Guarantee
A3: Our products come with a limited warranty of 12 to 18 months
from the shipment date to the original purchaser. We provide free
replacement or repair of defective products within this warranty
period. Please note that this warranty does not cover any units
that have been modified, misused, or neglected.
Q4: Shipment and Packing
A4: We usually ship our products using international express
services such as UPS, FedEx, DHL, and INT. The freight is prepaid,
but we can also use your shipment account for collection. Our
products are packed according to standard export packaging
requirements and include inspection certification.
Q5: Contact Us
A5: Our dedicated sales team is ready to assist you with any
technical or business inquiries. You can leave us a message or
click on the Online Service option to get in touch with us.
