Wear-Resistant Rotary Lobe And No Blockage Pumps For Thickened
Primary Sludge
Rotary lobe pumps
Our Rotary lobe pump is very suitable for use in Waste water
treatment ,The cost-effectiveness of a waste water treatment plant
depends mainly on the efficiency of its components. Each one of our
components plays a part in ensuring efficiency. And when individual
machines are combined, new possibilities for cost-effective
operation emerge.
Function
Due to the unique separation between the pump and gear chamber, the
ACCUVON lobe pump offer you maximum operational safety. This means
that no penetration of the medium into the bearing housing is
possible in the case of a product leak. In addition, the innovative
design allows you to inspect the mechanical seals visually. This
enables you to react at an early stage if necessary. Thanks to the
function of the rotary lobe pumps, you can also safely convey both
low and high viscosity media. Due to the significant free ball
passage and the low speeds, the positive displacement pumps are
insensitive to blockages, clogging and foreign bodies. Varying
solids contents have just as little influence on the flow rate as
pressure changes. This enables continuous and powerful pumping.
Specifications:
Our pumps are available in the series of 4 series with 16 different
sizes and flow rates of 1 to 3200 m³/h – high performance with
smallest footprint.
| ACCUVON | rate of flow
l/rev | flow
(m³/h) | pressure
(Mpa) | speed
rpm | Flange diameter
DN mm | power
Kw |
| AC25 | 0.196 | 0.1-7 | 0-1.2 | 10-600 | DN25 | 0.75-5.5 |
| AC50 | 0.392 | 0.2-14 | 0-1.0 | 10-600 | DN50 | 1.1-5.5 |
| AC75 | 0.588 | 0.3-21 | 0-0.6 | 10-600 | DN50 | 1.1-5.5 |
| AP80 | 1.125 | 0.6-400 | 0-1.8 | 10-600 | DN80 | 3-22 |
| AP100 | 1.875 | 1.1-66 | 0-1.4 | 10-600 | DN100 | 3-22 |
| AP120 | 2.864 | 1.7-103 | 0-1.0 | 10-600 | DN100 | 3-22 |
| AP140 | 3.714 | 2.2-133 | 0-0.6 | 10-600 | DN125 | 7.5-22 |
| AF125 | 4.566 | 2.7-164 | 0-1.6 | 10-600 | DN125 | 11-55 |
| AF150 | 6.828 | 4-246 | 0-1.2 | 10-600 | DN150 | 11-55 |
| AF200 | 9.456 | 5.5-340 | 0-0.8 | 10-600 | DN200 | 11-55 |
| AX250 | 12.5 | 7.5-487 | 0-2.5 | 10-650 | DN250 | 22-315 |
| AX300 | 25 | 15-975 | 0-1.0 | 10-650 | DN300 | 30-315 |
| AX350 | 37.5 | 22.5-1463 | 0-0.6 | 10-650 | DN350 | 45-315 |
| AX450 | 50 | 30-1950 | 0-0.4 | 10-650 | DN450 | 55-315 |
| AX350D | 75 | 45-2926 | 0-0.6 | 10-650 | DN350*2 | 90-450 |
| AX450D | 100 | 60-3900 | 0-0.4 | 10-650 | DN450*2 | 110-600 |
Advantages
1. Gap is kept between the rotors and rotors & pump body, no
friction, long using-life.
2. Simple assembling and disassembling, easy to maintenance and
clean, less easily-damaged parts.
3. High efficiency and energy-saving, low failure, reliable sealing
and low noise.
4. In the same type pump, different type rotor can be interchanged.
5. Capable to pump the viscous medium from 1cp to 2million cps.
6. Capable of pumping mixture of gas, fluid and solid medium.
7. Equipped with inverter, the flow can be adjusted as requirement
of end-user.
8. Flange, screw or clamp connection can be selected as required.
9. Higher hygienic grade, support CIP, SIP. The surface roughness
is 0.2--0.8um, got 3A, FDA certification.
10. Hygienic safety valve is built-in structure.
11. A control unit combined with a frequency inverter regulates the
speed of the pump so the liquid sugar is conveyed in doses from a
storage tank into the mixing container.
12.The pump is able to convey viscous product, is easy to service
and is resistant to pressure.
Testing Photo
