PPGL Pre-Painted Galvalume Steel Coils/Sheet
Product introduction of Color Coated Steel Coils
PPGI & PPGL (prepainted galvanized steel & prepainted galvalume
steel) also known as pre-coated steel or color coated steel coils,
They are use hot-dip galvanized sheets, hot-dip galvalume sheets,
electro-galvanized sheets, etc. as substrates. After surface
pretreatment (chemical degreasing and chemical conversion
treatment), one or several layers of organic coatings are coated on
the surface, and then A product that is baked and solidified.
Colored steel coils are named after being coated with organic
coatings of various colors, referred to as color-coated coils.
Substrate Type of Color Coated Steel Coils/Sheet
1.PPGI-Hot-dip galvanized color coated steel sheet(prepainted
galvanized steel sheet)
The product obtained by coating an organic coating on a hot-dip
galvanized steel sheet is a hot-dip galvanized color-coated plate.
In addition to the protective effect of zinc, the hot-dip
galvanized color-coated sheet also protects against rust and has a
longer service life than hot-dip galvanized sheet;
2.PPGL-Hot-dip aluminum-zinc color coated sheet(prepainted
galvalume steel sheet)
Hot-dip aluminum-zinc steel sheets can also be used as color-coated
substrates (55% AI-Zn and 5% AI-Zn)
PPGL steel is a durable, colorful, and economical building
material. It is the abbreviation for pre-painted galvalume steel,
which is with Al-Zn coated steel sheet substrate. Then the Al-Zn
coated steel is painted continuously in coil form. Because of its
excellent heat and corrosion resistance, it has become the
preferred material for a wide range of construction uses,
particularly roofing and walling.
3.Electro plated zinc color coated sheet
The electro-galvanized sheet is used as the substrate, and the
product obtained by baking with the organic coating is
an electrogalvanized color-coated plate. It has a beautiful
appearance and excellent processing properties, and
therefore can be mainly used for home appliances, audio, steel
furniture, interior decoration, and the like.
The Coating Type for PPGI/PPGL Color Coated Steel Coils& Sheet
Polyester (PE): Good adhesion, rich colors, wide range in formability and outdoor
durability, medium chemical
resistance, and low cost.
Silicon modified polyester(SMP): Good abrasion resistance and heat resistance, as well as good
external durability
and chalking resistance, gloss retention, general flexibility, and
medium cost.
High Durability Polyester(HDP): Excellent color retention and anti-ultraviolet performance,
excellent outdoor durability and anti-pulverization, good paint
film adhesion, rich color, excellent cost performance.
Polyvinylidene Fluoride(PVDF): Excellent color retention and UV resistance, excellent outdoor
durability and chalking
resistance,excellent solvent resistance, good moldability, stain
resistance, limited color, and high cost.
Application of PPGI/PPGL Color Coated Steel Coils& Sheet
Construction: Roofs, Walls, Garages, Acoustic Walls, Plumbing and Modular
Houses, etc.
Automotive: mufflers, exhaust pipes, wiper attachments, fuel tanks, truck
boxes, etc.
Home appliances: refrigerator back panel, gas stove, air conditioner, electronic
microwave oven, LCD frame,
CRT explosion-proofbelt, LED backlight, electrical cabinet, etc.
Agricultural use: pig house, chicken house, granary, greenhouse pipes, etc.
Others: Thermal insulation cover, heat exchanger, dryer, water heater,
etc.
Specifications of PPGL-Pre-Painted Hot Dipped Galvalume Steel Coils/Sheet
| Width | 600mm-1250mm |
| Thickness | 0.2mm-1.5mm |
| Length | customized |
| Zinc Coating | AZ 40gr/m2-AZ 185gr/m2 (double |
| Surface | Skinpass Resistant to Fingerprints(AFP) |
| Chemical treatment | Chromated |
| Spangle | Regular spangle |
| Grade | JIS G3321-SGLCC,SGLC340-570,(G550)ASTM A755M CS B,SS255-SS550 |
| Packing | Export standard packing ,3 Layers-kraft paper outside+waterproof
plastic film in the middible+steel plate vovered with strips |
| Coil Weight | 3-14 tons |
| Coil ID | 508/610mm |
| Color | RAL or Customized |
| HRB | Soft Hard(<60),Medium Hard(60-85),Full Hard(85-95) |
| Rar Materials | Ga |
Structure of Pre painted Galvalume Steel Coil:
*Top coat (finishing) which provides color, pleasing appearance and appearance and a
barrier film to enhance long-term durability.
*Primer coat to prevent undercutting of paint and enhance corrosion resistance.
*Pretreatment layer applied for good adhesion and to enhance corrosion resistance.
*Base steel sheet.
The Pictures of PPGL Pre-Painted Galvalume Steel Coils/sheet
The Products Display of PPGL Pre-Painted Galvalume Steel Coils
