xlpe insulated aluminum core power cable 3core aluminum cable steel
wire armored
Description:
0.6/1KV PVC Insulated Cables
IEC60502,IEC60228,GB/T 12706.1-2008
CE,CCC,ISO
Construction:
Conductors:Copper or Aluminium conductor, round standed or Shaped,
Class 2 to IEC 60228, BS EN 60228. For smaller sizes, a solid round
conductor, Class 1 as per IEC 60228, BS EN 60228 can also be
supplied upon request.
Noted: Insulation color as per standards or customer requirement.
Application:
These cables are used for electricity supply in low voltage
installation system, They are suitable for installation in indoors
and outdoors, in cable ducts, under ground, in power and switching
stations, local energy distributions, industrial plants, where
there is no risk of mechanical damage.
steel tape armored aluminum cable 5core xlpe insulated with nominal
voltage 0.6-1kv Construction
Standard: IEC60502-1, GB/T 12706
•Conductor: Copper or Aluminium conductor, round standed or Shaped,
Class 2 to IEC 60228, BS EN 60228. For smaller sizes, a solid round
conductor, Class 1 as per IEC 60228, BS EN 60228 can also be
supplied upon request.
•XLPE Insulation material and thickness shall be as per IEC 60502
or BS 5467 rated for 90°C continuous operation.
• PVC Sheath shall be of Extruded PVC Type ST2 as per IEC 60502-1
or Type 9 as BS 6346/5467.Special type of PVC sheathing material
such as Fire Retardant PVC, Anti-Termite PVC, Anti-Rodent PVC,
Sunlight resistant PVC, Oil Resistant PVC are available on special
request. Also, special sheathing materials such as LDPE, MDPE,
HDPE,LSF, CPE are available on request.
Technical data
Operating voltage:600/1000 V
Test voltage: 3500V, according to IEC 60502
Operation temperature:–25°C to + 90°C
Permissible short therm: + 250°C
Lowest ambient temperature:–25°C
Bending radius:
1.5mm2 to 16mm2 - Fixed: 6 x overall diameter
25mm2 and above - Fixed: 8 x overall diameter
Special version upon request
Fire resistant version
LSZH sheath version
AWA,SWA,STA armoured version
PE sheath version
Aluminum cable technical parameters
Nominal Cross Section | Diameter of Conductor (Approx.) | Nominal Insulation Thickness | Nominal PVC Sheath Thickness | Overall Diameter (Approx.) | Weight of Cable (Approx.) |
| mm² | mm | mm | mm | mm | Kg/Km |
| 1x1.5 | 1.6 | 0.7 | 1.4 | 6.0 | 50 |
| 1x2.5 | 2.0 | 0.7 | 1.4 | 6.5 | 70 |
| 1x4 | 2.25 | 0.7 | 1.4 | 7.0 | 80 |
| 1x6 | 2.76 | 0.7 | 1.4 | 7.5 | 110 |
| 1x10 | 4.0 | 0.7 | 1.4 | 8.5 | 150 |
| 1x16 | 5.0 | 0.7 | 1.4 | 9.5 | 215 |
| 1x25 | 6.3 | 0.9 | 1.4 | 11.5 | 315 |
| 1x35 | 7.4 | 0.9 | 1.4 | 12.0 | 415 |
| 1x50 | 8.8 | 1.0 | 1.4 | 13.0 | 555 |
| 1x70 | 10.6 | 1.1 | 1.4 | 15.0 | 760 |
| 1x95 | 12.4 | 1.1 | 1.5 | 17.0 | 1025 |
| 1x120 | 14.0 | 1.2 | 1.5 | 18.5 | 1270 |
| 1x150 | 15 .5 | 1.4 | 1.6 | 21.5 | 1575 |
| 1x185 | 17.4 | 1.6 | 1.6 | 23.0 | 1955 |
| 1x240 | 20.3 | 1.7 | 1.7 | 26.0 | 2470 |
| 1x300 | 22.7 | 1.8 | 1.8 | 28.0 | 3155 |
| 1x400 | 25.4 | 2.0 | 1.9 | 32.0 | 4049 |
| 1x500 | 28.8 | 2.2 | 2.0 | 36.0 | 5100 |
| 1x630 | 30.4 | 2.4 | 2.2 | 40.0 | 6410 |
| 1x800 | - | 2.6 | 2.3 | 47.0 | 8200 |
| 1x1000 | - | 2.8 | 2.4 | 52.0 | 10210 |
Nominal Cross Section | Diameter of Conductor (Approx.) | Nominal Insulation Thickness | Nominal PVC Sheath Thickness | Overall Diameter (Approx.) | Weight of Cable (Approx.) |
| mm² | mm | mm | mm | mm | Kg/Km |
| 3x1.5 | 1.6 | 0.7 | 1.8 | 10.5 | 150 |
| 3x2.5 | 2.0 | 0.7 | 1.8 | 11 | 190 |
| 3x4 | 2.6 | 0.7 | 1.8 | 12.5 | 250 |
| 3x6 | 3.1 | 0.7 | 1.8 | 14.5 | 320 |
| 3x10 | 4.0 | 0.7 | 1.8 | 15.5 | 465 |
| 3x16 | 5.0 | 0.7 | 1.8 | 18.5 | 670 |
| 3x25 | 6.3 | 0.9 | 1.8 | 19.5 | 965 |
| 3x35 | 7.4 | 0.9 | 1.8 | 22 | 1290 |
| 3x50 | 8.8 | 1.0 | 1.8 | 26 | 1750 |
| 3x70 | 10.6 | 1.1 | 1.9 | 28.5 | 2450 |
| 3x95 | 12.4 | 1.1 | 2.0 | 32.5 | 3200 |
| 3x120 | 14.0 | 1.2 | 2.1 | 35.5 | 4010 |
| 3x150 | 15.5 | 1.4 | 2.3 | 40 | 5050 |
| 3x185 | 17.4 | 1.6 | 2.4 | 44.5 | 6105 |
| 3x240 | 20.3 | 1.7 | 2.6 | 54 | 8050 |
| 3x300 | 22.7 | 1.8 | 2.7 | 60.5 | 9998 |
| 3x400 | 25.4 | 2.0 | 3.0 | 66 | 13210 |
Why Choose Zhenglan Cable:
- OEM/ODM services provided;
- Products comply with GB, IEC, BS, ASTM, DIN, VDE and JIS standards;
Customer standard requirments Accepted;
- Certified to ISO 9001:2015, ISO 14001:2015 and OHSAS 18001:2007;
- Registered capital of $30 million and factory covers an area of
60,000㎡;
- Advanced test equipment and procedures, 100% inspection before
factory;
- Enough stocks and the higest efficient shipping time guarranteed;
- Professional pre-sales and after-sales services provided.
Zhenglan Cable Technology Co., Ltd (www(.)zhenglancable(.)com), is
CE and ISO approved China cable and wire manufacturer with about 20
years' experience located in Zhengzhou, Henan province, middle of
China.
Our main products are
overhead power transmission use bare conductor(ACSR, AAC, etc)
1kv, 10kv, 35kv overhead power transmission use insulated
conductor(single core covered cable, ABC cable)
STA/SWA armored or unarmored PVC/XLPE/PE insulated LV(low voltage)
power cable
STA/SWA armored or unarmored XLPE insulated MV(medium voltage)power
cable
450/750V instrument use control cable (shielded or unshielded)
300/300V, 300/500V, 450/750V fixed installation use building wire
FAQ
Is your company a factory or a trade company?
Factory, more than 20 years in China
How long can I expect to get the sample?
After you pay the freight charge and send us confirmed files, the
samples will be ready for delivery in 3-7 days. The samples will be
sent to you via express and arrive in 3~7 days. You can use your
own express account or prepay us if you do not have an account.
What are your payment terms?
We normally accept T/T 30% deposit, 70% balance before delivery as
the main payment terms, and other payment can also be negotiated.
Trade assurance on is also available.
What’s the delivery time?
Sample order needs 3~5 days. Formal order depends on the quantity.
Usually it needs 7-30 days after get your payment.
What is your MOQ?
Generally it is 1000m.
