0.6/1kv xlpe insulated 4 core 16sqmm power cable cu/xlpe/pvc/pvc
Description:
0.6/1KV PVC Insulated Cables
IEC60502,IEC60228,GB/T 12706.1-2008
CE,CCC,ISO
Construction:
Conductors:Copper or Aluminium conductor, round standed or Shaped,
Class 2 to IEC 60228, BS EN 60228. For smaller sizes, a solid round
conductor, Class 1 as per IEC 60228, BS EN 60228 can also be
supplied upon request.
Noted: Insulation color as per standards or customer requirement.
Application:
These cables are used for electricity supply in low voltage
installation system, They are suitable for installation in indoors
and outdoors, in cable ducts, under ground, in power and switching
stations, local energy distributions, industrial plants, where
there is no risk of mechanical damage.
Standard:
Basic design to IEC 60502-1, IEC 60228,BS EN 60228
China: GB/T 12706.2-2008
Other standards such as BS7870,DIN and ICEA upon request
Certificates:
CE, ROHS,KEMA and more others at request
Insulation:
PVC Insulation material and thickness shall be as per IEC 60502-1
and BS 6346. PVC material shall be Type A as per IEC 60502-1 or TI1
as per BS EN 50363.PVC Insulation material as per SASO 1694 rated
for 85°C continuous operation is also available upon special
request.
Colour Code Colour Code (1):
1 Core: Red or Black; 2 Cores: Red, Black; 3 Cores: Red, Yellow,
Blue; 4 Cores: Red, Yellow, Blue, Black; 5 Cores: Red, Yellow,
Blue, Black, Green; Above 5 Cores: Black Cores with White numerals
Assembly /Inner Sheath:
Two, Three or Four insulated conductors are laid-up together with
non-hygroscopic fillers and the assembly is bedded with an extruded
layer of PVC. In case of non- armoured cables, this layer may be
omitted
Armour: Aluminum/Galvanized Steel Wires applied helically over the
bedding as per IEC 60502 or as per BS 5467, BS 6346. Single core
cables shall be Aluminium wire armour. Aluminum/Steel Tapes applied
helically over the bedding of multi-core cables as per IEC 60502.
Outer Sheath: Outer sheath shall be of Extruded PVC Type ST2 as per IEC 60502-1
or Type 9 as BS 6346/5467.Special type of PVC sheathing material
such as Fire Retardant PVC, Anti-Termite PVC, Anti-Rodent PVC,
Sunlight resistant PVC, Oil Resistant PVC are available on special
request. Also, special sheathing materials such as LLDPE, MDPE,
HDPE, LSF, CPE are available on request.
Fire Performance of Cable Sheaths: Cables can be supplied with special flame retardant PVC outer
sheath to comply with the flame test requirements of IEC
60332-3-22, IEC 60332-3-23 and IEC 60332-3-24, can also supply
cables with Low Smoke Halogen Free (LSHF) material according to IEC
60502-1, BS 7211, BS 6724 or other equivalent standards.
Cable Parameters:
Nominal Cross Section | Diameter of Conductor (Approx.) | Nominal Insulation Thickness | Nominal PVC Sheath Thickness | Overall Diameter (Approx.) | Weight of Cable (Approx.) |
| mm² | mm | mm | mm | mm | Kg/Km |
| 4x1.5 | 1.38 | 0.7 | 1.8 | 11 | 170 |
| 4x2.5 | 1.76 | 0.7 | 1.8 | 12 | 230 |
| 4x4 | 2.25 | 0.7 | 1.8 | 14 | 305 |
| 4x6 | 2.76 | 0.7 | 1.8 | 15.5 | 400 |
| 4x10 | 4.0 | 0.7 | 1.8 | 18 | 585 |
| 4x16 | 5.0 | 0.7 | 1.8 | 20 | 835 |
| 4x25 | 6.3 | 0.9 | 1.8 | 22 | 1210 |
| 4x35 | 7.4 | 0.9 | 1.8 | 24.5 | 1670 |
| 4x50 | 8.8 | 1.0 | 1.8 | 26.5 | 2250 |
| 4x70 | 10.6 | 1.1 | 2.0 | 32 | 3015 |
| 4x95 | 12.4 | 1.1 | 2.1 | 36.5 | 4085 |
| 4x120 | 14.0 | 1.2 | 2.3 | 40.5 | 5320 |
| 4x150 | 15.5 | 1.4 | 2.4 44.5 | 44.5 | 6510 |
| 4x185 | 17.4 | 1.6 | 2.6 | 51 | 8050 |
| 4x240 | 20.3 | 1.7 | 2.8 58.5 | 58.5 | 10520 |
| 4x300 | 22.7 | 1.8 | 3 | 64.5 | 13130 |
| 4x400 | 25.4 | 2.0 | 3.3 | 73.5 | 16850 |
Why Choose Zhenglan Cable:
- OEM/ODM services provided;
- Products comply with GB, IEC, BS, ASTM, DIN, VDE and JIS standards;
Customer standard requirments Accepted;
- Certified to ISO 9001:2015, ISO 14001:2015 and OHSAS 18001:2007;
- Registered capital of $30 million and factory covers an area of
60,000㎡;
- Advanced test equipment and procedures, 100% inspection before
factory;
- Enough stocks and the higest efficient shipping time guarranteed;
- Professional pre-sales and after-sales services provided.
Zhenglan Cable Technology Co., Ltd (www(.)zhenglancable(.)com), is
CE and ISO approved China cable and wire manufacturer with about 20
years' experience located in Zhengzhou, Henan province, middle of
China.
Our main products are
overhead power transmission use bare conductor(ACSR, AAC, etc)
1kv, 10kv, 35kv overhead power transmission use insulated
conductor(single core covered cable, ABC cable)
STA/SWA armored or unarmored PVC/XLPE/PE insulated LV(low voltage)
power cable
STA/SWA armored or unarmored XLPE insulated MV(medium voltage)power
cable
450/750V instrument use control cable (shielded or unshielded)
300/300V, 300/500V, 450/750V fixed installation use building wire
