DC24V 1x2 2x2 4x4 MM fiber External Bypass switch
Introduction of 8 channel Bypass Switch
OM-FBS-44-MLC is an external fiber bypass unit for critical
optical-nodes in optical network system.
- It supports 100G/40G/10G/1G and 100M fiber connections and offers
LC multimode option.
- It is usually used in some major optical networks involving ring
connection and multiple devices such as in railway communication
systems, factory automation and important optical nodes where
intended or unexpected power loss occurs.
Product Features of Optical Fiber Bypass
- Available in existing/new optical nodes
- Support Din/Wall mounting
- Industrial removable green terminal block
- Operating temperature: -20℃ ~70℃
- Robust IP40 level housing
- Bypass switching time ≤10ms
- Low insertion loss, low channel crosstalk
- DC9V~DC52V redundant power input
Specification of optical Bypass Unit
| Product Name | Optical Fiber Bypass Switch |
| Power Interface | Standard industrial terminal block. |
| Polarity Protection | Support |
| Optical Fiber Interface | LC |
| Wavelength Range | 850±40/1300±40nm; 1260~1650nm |
| Test Wavelength | 850/1300nm; 1310/1550nm |
| Insert Loss | Typ:0.6 dB Max:1.0 dB ; Typ:0.6dB Max:1.0 dB |
| Return Loss | MM≥30 dB SM≥50 dB |
| Channel Crosstalk | MM≥35 dB SM≥55 dB |
| Polarization Loss | ≤0.05 dB |
| Wavelength Loss | ≤0.05 dB |
| Temperature Loss | ≤0.05 dB |
| Repeatability | ≤0.05 dB |
| Operating voltage | DC9V-52V |
| Service life | ≥100000000 times |
| Switching time | ≤10 ms |
| Transmission optical power | ≤500 mw |
Application diagram of fiber bypass switch
- Easy power control for networking system
- System Monitoring
- Smart protection of optical paths
What is bypass switch?
Bypass unit or module is usually used to protect the network
system(bypassing the device it connects) when power is suddenly
off.
In a linear network system(like below diagram), the transmission is
fine if the data/SFP/power is normal.
What if any power supply is off (like power surge, striking,
man-made damage...)
The whole network system will fail.
Another situation is, power overhaul/maintenance is required for
switch 2(the middle one) area, lets say for 12 hours, the whole
system got to stop.
With a bypass module/switch, it is like putting in a protection
mechanism in the whole system.
A bypass switch helps protect the whole system if one or many
switches fail at the same time.
Packing List
- 1pc optical fiber bypass switch
- 1pc user manual
- 1pc warranty card
Actual Photos
