Product Description:
The effects of straightening heating temperature and cooling rate
on straightening deformation, microstructure and properties of U
profile were studied. The results show that under the same cooling
rate, the straightening deformation effect of U profile is good
with the straightening temperature increasing. At the same heating
temperature, with the decrease of cooling rate, the resilience
after high temperature straightening deformation is smaller, and
the straightening deformation effect of U profile is better.
When the straightening heating temperature is 720℃ and the cooling
rate is 30℃/min, the straightening U profile meets the relevant
requirements of AMS2245 "Dimensional Tolerance of Titanium and
titanium alloy extrusion bars, bars and profiles"; The
straightening heating temperature is not higher than 720℃, and the
straightening process does not change its structure and properties.
Titanium alloys have been widely used in aviation industry and
aerospace technology because of their high specific strength, heat
resistance and corrosion resistance. The advantages of using the
hot extrusion process to produce titanium alloy profiles are that
the hot extrusion method makes the deformed metal have the best
three-way compressive stress state, so that higher quality products
can be obtained. When the hot extrusion process is used, because
the preparation of the mold is relatively simple, the flexibility
of replacing the variety is greatly improved, which also improves
the economy of the product.
Features:
Titanium alloys have been widely used in aviation industry and
aerospace technology because of their high specific strength, heat
resistance and corrosion resistance. The advantages of using the
hot extrusion process to produce titanium alloy profiles are that
the hot extrusion method makes the deformed metal have the best
three-way compressive stress state, so that higher quality products
can be obtained.
A study was conducted to observe the effects of straightening
heating temperature and cooling rate on straightening deformation,
microstructure and properties of U profile. It was found that under
the same cooling rate, the better straightening deformation effect
of U profile gets as the straightening temperature increases.
Moreover, when the straightening heating temperature is 720℃ and
the cooling rate is 30℃/min, the straightening U profile conforms
to the relevant requirements of AMS2245 "Dimensional Tolerance of
Titanium and titanium alloy extrusion bars, bars and profiles".
Furthermore, when the cooling rate is decreased at the same heating
temperature, the resilience after high temperature straightening
deformation is smaller, and the straightening deformation effect of
U profile performs better. It is also noted that the straightening
heating temperature should not exceed 720℃ to avoid any change in
its structure and properties.
Technical Parameters:
| Name | Titanium Channel |
|---|
| Material | Titanium Metal/Alloy |
|---|
| Application | Industrial |
|---|
| Color | Silver |
|---|
| Technology | Forging, Tying, Annealing, Machining, Cold Rolling, Hot Rolling |
|---|
| Standard | ASTM F67, AMS4928, ASTM F136, ASTM B348, BT1-0, TP270, TP550, TP450
Etc. |
|---|
| Grade | Gr1, Gr2, Gr3, Gr4, Gr5, Gr6, Gr7, Gr10 |
|---|
| Surface Treatment | Bright, Smooth, Clean |
|---|
| Packaging | Carton |
|---|
| Size | Customized |
|---|
Applications:
Titanium metal and alloys have demonstrated superior properties, such as strong heat resistance, low temperature
toughness, and fracture toughness, which lead it to wide use in the
aerospace industry. These properties make titanium alloys
especially useful for aircraft engine parts, rocket and missile
structural parts, fuel and oxidizer storage tanks, and
high-pressure vessels. In addition to these uses, it has also been
utilized to make automatic rifles, mortar mounts, and recoilless
gun tubes.
Titanium Channel
| No. | Production name | Specification(mm) | Length(mm) | About Kgs per piece | remark |
| 1 | 5# channel | 50X38X4.5 | L=6000 | 18.74 | Equal sides |
| 2 | 6.3# channel | 63X40X4.8 | L=6000 | 22.86 | Equal sides |
| 3 | 8# channel | 80X43X5 | L=6000 | 27.73 | Equal sides |
| 4 | 10# channel | 100X48X5.3 | L=6000 | 34.49 | Equal sides |
| 5 | 12# channel | 120X53X5.5 | L=6000 | 41.56 | Equal sides |
| | | | | |
| materials | Gr1,Gr2,Gr3,Gr4,Gr5........ |
| Standards: | GB/T706-2016,GB/T37520-2019,GB/T41750-2022,N/HL 001-2021,N/HL
002-2021,ASTM F67,AMS4928,ASTM F136,ASTM
B348,BT1-0,TP270,TP550,TP450 etc.
|
Packing and Shipping:
Titanium Channel Packaging and Shipping includes the following:
- Carefully package the product in an air-tight, corrugated box.
- Ensure that the box is large enough to accommodate all the
components of the product.
- Include a packing slip in the package that specifies the contents.
- Write the customer's address correctly on the box.
- Attach an appropriate shipping label, such as the one provided by
the shipping company.
- Ship the package using a reputable shipping company, such as UPS or
FedEx.
FAQ:
Q1: What is FHH Titanium Channel?
A1: FHH Titanium Channel is a high performance and durable product
manufactured by Xi’an FHH Metal Products Co., Ltd in China.
Q2: Where is FHH Titanium Channel made?
A2: FHH Titanium Channel is made in Xi’an, China.
Q3: What is the minimum order quantity for FHH Titanium Channel?
A3: The minimum order quantity for FHH Titanium Channel is 200kgs.
Q4: How is FHH Titanium Channel packaged for shipment?
A4: FHH Titanium Channel is packed by seaworth shipment materials.
Q5: How long does it take to receive an order of FHH Titanium
Channel?
A5: FHH Titanium Channel orders can be delivered within 5-8 days.
Q6: What payment methods are accepted for FHH Titanium Channel?
A6: FHH Titanium Channel orders can be paid by L/C, D/P, T/T.
Q7: How much FHH Titanium Channel can be supplied per month?
A7: FHH Titanium Channel is supplied up to 200mt per month.
