1A1R Resin diamond cutting disc (silicon carbide ceramic cutting
disc)
Silicon carbide ceramic cutting disc product specifications:
150*1.0*25.4
It can also be customized according to customer requirements. The
small diameter can be 80mm and the diameter can be 400mm.
Precautions for cutting silicon carbide ceramic cutting discs:
1. Please check the silicon carbide ceramic cutting disc carefully
before installing it. If there is a chip or other damage, please
stop using it.
2. When the silicon carbide ceramic cutting disc is marked with a
direction of rotation, it must be consistent with the direction of
rotation of the machine tool. On the contrary, the cutting is not
sharp and it is difficult to exert the performance of the cutting
grinding wheel.
3. Please do not use silicon carbide ceramic cutting discs that do
not meet the requirements
4. If any abnormality is found during the cutting process, the
machine should be stopped immediately to investigate the cause.
5. When the cutting is not sharp, the silicon carbide ceramic
cutting disc must be trimmed and sharpened. If you continue to use
it, there is a possibility of overheating, overloading and damage
to the grinding wheel.
6. When the silicon carbide ceramic cutting disc is rotating, it is
strictly forbidden to use your hands for cutting, and you are not
allowed to touch the grinding wheel with your hands and body.
7. Diamond ultra-thin cutting blades are strictly prohibited from
being used for operations other than grooving or cutting to avoid
abnormalities due to uneven stress.
Instructions for ordering silicon carbide ceramic cutting discs:
When customers choose silicon carbide ceramic cutting discs, they
tell us the product specifications, diameter, thickness, aperture,
etc., the requirements of the cutting products, rough cutting and
fine cutting
