Aluminium Extruded Angle Corner Joint Connector Fitting Frame For
Windows
Aluminum Connection Introduction:
Corner pieces are often used to connect aluminum profiles in the
process of building the frame. The whole installation process does
not need to be processed. It can be directly fixed with bolts and
nuts, which is simple and convenient and has high connection
strength. Common bolts and nuts include T-bolt + flange nut. Can
the corner pieces only be connected and fixed with T-bolts in the
connection process? Of course not. You can choose different types
of bolts and nuts according to your needs. For example, slider nut
+ hexagon socket head bolt, T-shaped nut + hexagon socket head
bolt, square nut + flat machine bolt, hexagon socket stud + square
nut, slider nut + flat machine bolt can be selected according to
the bearing strength of the frame.
Corner Piece Corner Code
It should be noted that only when flange nuts and square nuts are
used, the nuts are groove corner parts, and other matching methods.
The nuts are locked in the groove, so they can be divided into
front nut series and rear nut series. The specific installation
difference is that the rear nut needs to be inserted into the
predetermined position of the profile groove before installation,
and then tighten the bolts; The front nut is to fix the bolt in the
profile groove first, and then screw the nut on the bolt.
Corner Piece Installation
There are many corner specifications. Basically, each profile
specification has a corresponding size specification. You just need
to select the corresponding corner specification according to the
profile specification. For example, 4040 corner pieces are used for
4040 aluminum profiles. Corner pieces also include 45 degree corner
pieces, 135 degree corner pieces, strong corner pieces, etc. you
can choose according to your own needs.
Profile Specification:
| Description | Aluminium Extruded Angle Corner Joint Connector Fitting Frame For
Windows |
| Material Thickness(t) | 0.8-2.0 mm |
| Materiral | aluminum alloy 6063 |
| Annealing Treatment | T3-T8 |
| Color | Wood, Silver White ,Bronze , Champagne, Black, (RAL series)etc. |
| Surface Treatment | anodized, powder coated, electrophoresis, wood grain, polished and
etc |
| Shape | Square, Round, Flat, Oval, and according to customer's drawing. |
| Length | Normal length=6m or in customer's order |
| Usage | Building, Production Line, Decoration, Industrial, Transportation,
Door and window, etc. |
| Package | 1. Pearl cotton foam for each profile;
2. Wrap with shrink film exterior;
3. Packed according to customer request. |
| Advantages/Features | Providing colorful products with various mechanical
performances to adapt all kinds of architectural styles |
Aluminum Profiles Features:
Corrosion resistance
The density of aluminum profile is only 2.7g/cm3, which is about
1/3 of that of steel, copper or brass (7.83g/ cm3, 8.93g/ cm3,
respectively). In most environmental conditions, including in air,
water (or salt water), petrochemistry and many chemical systems,
aluminum can show excellent corrosion resistance.
conductivity
Aluminum profile is often selected for its excellent conductivity.
On the basis of equal weight, the conductivity of aluminum is
nearly 1/2 of copper.
Thermal conductivity
The thermal conductivity of aluminum alloy is about 50-60% of
copper, which is beneficial to the manufacture of heat exchanger,
evaporator, heating appliance, cooking utensil, cylinder head and
radiator of automobile.
Nonferromagnetism
Aluminum profile is non ferromagnetic, which is an important
feature for the electrical and electronic industries. Aluminum
profiles cannot be self ignition, which is important for the
application of handling or contacting inflammable and explosive
materials.
Processability
The processability of aluminum profile is excellent. In various
deformation and casting aluminum alloys, and in the various states
after the production of these alloys, the machining characteristics
have changed greatly, which requires special machine tools or
technologies.
Formability
The allowable deformation is controlled by specific tensile
strength, yield strength, ductility and corresponding processing
hardening rate.
Recyclability
Aluminum has high recovery, and the characteristics of recycled
aluminum are almost the same as that of primary aluminum.
Product Description:
FAQ:
Q – What is the average lead time for pre production samples?
A – Our average lead time is normally 7 days for making new samples
and 7 days for testing , totally need about 14days.
Q – What is the average lead time for mass production?
A – Our average lead time is delivery within 20-30 days after
receive deposit and and moulds/samples are passed.
Q – What is CAD?
A – CAD stands for “computer assisted design” and it is a 3-D
program that is used by our clients to provide our technicians with
a three-dimensional example of the custom shape that they want made
at GUANGDONG YONGLONG ALUMINUM.Aluminium Window Profiles
Q – What is a die?
A – A die is a tool that is used to help forge a custom shape
during the extrusion process. The die is made from durable steel so
that it can be used again and again to fill the client’s order.
Q – What does extrusion mean?
A – Extrusion is the process that is used to create custom shapes
from raw aluminum materials according to a client’s specifications.
The raw materials are heated and are then forced through a die to
create the desired shape using extreme pressure.
Welcome to visit our company !
Choose us & contact us !
