Aluminum Windows Doors Set Black Surface With Mesh Aluminium
Section
Door and Window Corner Code?:
1. Movable corner code process
The movable corner code process is to connect with aluminum through
spring snap and fix the doors and windows in the way of tightening
them by screws. The left and right structures are detachable and
installed, which is convenient for disassembly and assembly and
easy to assemble the frame, but the connection is not tight enough,
and the water inflow for a long time is easy to rust, lose
elasticity or break the spring part.
2. Collision angle process
The angle striking process is to apply section glue on the surface
of aluminum alloy profile, insert the corner code into the 45
degree cut profile, and connect it through impact extrusion by
precision machine. It is seamless and not easy to crack in water.
However, because the collision angle needs to be carried out during
production, field framing is not supported.
3. Glue injection process
The corner code used in the glue injection process is a
high-density aluminum alloy extruded horizontally and a special
corner code for diversion glue injection after special processing,
turning and milling surface treatment. This corner code has
stronger toughness and stability. After the corner striking is
completed, high-quality imported corner glue with strong weather
resistance is injected for sealing, which strengthens the sealing
performance of the whole door and window.
Profile Specification:
| Description | Aluminum Windows Doors Set Black Surface With Mesh Aluminium
Section |
| Material Thickness(t) | 0.8-2.0 mm |
| Materiral | aluminum alloy 6063 |
| Annealing Treatment | T3-T8 |
| Color | Wood, Silver White ,Bronze , Champagne, Black, (RAL series)etc. |
| Surface Treatment | anodized, powder coated, electrophoresis, wood grain, polished and
etc |
| Shape | Square, Round, Flat, Oval, and according to customer's drawing. |
| Length | Normal length=6m or in customer's order |
| Usage | Building, Production Line, Decoration, Industrial, Transportation,
Door and window, etc. |
| Package | 1. Pearl cotton foam for each profile;
2. Wrap with shrink film exterior;
3. Packed according to customer request. |
| Advantages/Features | Providing colorful products with various mechanical
performances to adapt all kinds of architectural styles |
Aluminum Profiles Features:
Corrosion resistance
The density of aluminum profile is only 2.7g/cm3, which is about
1/3 of that of steel, copper or brass (7.83g/ cm3, 8.93g/ cm3,
respectively). In most environmental conditions, including in air,
water (or salt water), petrochemistry and many chemical systems,
aluminum can show excellent corrosion resistance.
conductivity
Aluminum profile is often selected for its excellent conductivity.
On the basis of equal weight, the conductivity of aluminum is
nearly 1/2 of copper.
Thermal conductivity
The thermal conductivity of aluminum alloy is about 50-60% of
copper, which is beneficial to the manufacture of heat exchanger,
evaporator, heating appliance, cooking utensil, cylinder head and
radiator of automobile.
Nonferromagnetism
Aluminum profile is non ferromagnetic, which is an important
feature for the electrical and electronic industries. Aluminum
profiles cannot be self ignition, which is important for the
application of handling or contacting inflammable and explosive
materials.
Processability
The processability of aluminum profile is excellent. In various
deformation and casting aluminum alloys, and in the various states
after the production of these alloys, the machining characteristics
have changed greatly, which requires special machine tools or
technologies.
Formability
The allowable deformation is controlled by specific tensile
strength, yield strength, ductility and corresponding processing
hardening rate.
Recyclability
Aluminum has high recovery, and the characteristics of recycled
aluminum are almost the same as that of primary aluminum.
Product Description:
FAQ:
Q – What is the average lead time for pre production samples?
A – Our average lead time is normally 7 days for making new samples
and 7 days for testing , totally need about 14days.
Q – What is the average lead time for mass production?
A – Our average lead time is delivery within 20-30 days after
receive deposit and and moulds/samples are passed.
Q – What is CAD?
A – CAD stands for “computer assisted design” and it is a 3-D
program that is used by our clients to provide our technicians with
a three-dimensional example of the custom shape that they want made
at GUANGDONG YONGLONG ALUMINUM.Aluminium Window Profiles
Q – What is a die?
A – A die is a tool that is used to help forge a custom shape
during the extrusion process. The die is made from durable steel so
that it can be used again and again to fill the client’s order.
Q – What does extrusion mean?
A – Extrusion is the process that is used to create custom shapes
from raw aluminum materials according to a client’s specifications.
The raw materials are heated and are then forced through a die to
create the desired shape using extreme pressure.
Welcome to visit our company !
Choose us & contact us !
