6063 T5 Wood Grain Surfaces Aluminum Window Door Profiles Extrusion
For Chile
Wood Grain Technology:
There are two types of wood grain transfer technology, one is water
mark transfer technology, and the other is water drape transfer
technology. The former mainly completes the transfer of characters
and photo patterns, while the latter tends to complete the transfer
on the whole product surface. In the introduction to printing
industry written in 1973, it was pointed out that "Chinese printing
was not invented by someone alone, nor was it suddenly invented in
a certain era; It is the crystallization of the wisdom of thousands
of sages, the accumulation of thousands of years of experience, and
the collective creation of gradual comprehensive evolution and
development.
”Cubic transfer uses an aqueous film that is easily dissolved in
water to carry graphics and text. Due to the excellent tension of
the water covered film, since the early Tang Dynasty, the middle
Tang Dynasty, the late Tang Dynasty, the Five Dynasties and the
Song Dynasty are overthrown by the existing literature and cultural
relics, there is no need for further discussion of Beijing
stainless steel. Therefore, this paper only briefly reviews and
describes the four theories of the Han Dynasty, the Six Dynasties,
the Sui Dynasty and Jiang Yuan.
Printing is a process technology, which transfers the wood grain on
the printing plate to the substrate through transfer materials. It
is easy to wrap around the product surface to form a graphic layer,
and the product surface gets a completely different appearance like
painting. Drape transfer technology can drape color patterns on
workpieces of any shape. The switcher can solve the problem of
three-dimensional product printing for manufacturers.
Curved surface coating can also add different lines on the product
surface, such as leather grain, wood grain, emerald grain and
dolomite grain. At the same time, it can also avoid the vacancy
often seen in general board printing. In addition, in the printing
process, because the product surface does not need to contact with
the printing film, it can avoid damaging the product surface and
its integrity.
Profile Specification:
| Description | 6063 T5 Wood Grain Surfaces Aluminum Window Door Profiles Extrusion
For Chile |
| Material Thickness(t) | 0.8-2.0 mm |
| Materiral | aluminum alloy 6063 |
| Annealing Treatment | T3-T8 |
| Color | Wood, Silver White ,Bronze , Champagne, Black, (RAL series)etc. |
| Surface Treatment | anodized, powder coated, electrophoresis, wood grain, polished and
etc |
| Shape | Square, Round, Flat, Oval, and according to customer's drawing. |
| Length | Normal length=6m or in customer's order |
| Usage | Building, Production Line, Decoration, Industrial, Transportation,
Door and window, etc. |
| Package | 1. Pearl cotton foam for each profile;
2. Wrap with shrink film exterior;
3. Packed according to customer request. |
| Advantages/Features | Providing colorful products with various mechanical
performances to adapt all kinds of architectural styles |
Aluminum Profiles Features:
Corrosion resistance
The density of aluminum profile is only 2.7g/cm3, which is about
1/3 of that of steel, copper or brass (7.83g/ cm3, 8.93g/ cm3,
respectively). In most environmental conditions, including in air,
water (or salt water), petrochemistry and many chemical systems,
aluminum can show excellent corrosion resistance.
conductivity
Aluminum profile is often selected for its excellent conductivity.
On the basis of equal weight, the conductivity of aluminum is
nearly 1/2 of copper.
Thermal conductivity
The thermal conductivity of aluminum alloy is about 50-60% of
copper, which is beneficial to the manufacture of heat exchanger,
evaporator, heating appliance, cooking utensil, cylinder head and
radiator of automobile.
Nonferromagnetism
Aluminum profile is non ferromagnetic, which is an important
feature for the electrical and electronic industries. Aluminum
profiles cannot be self ignition, which is important for the
application of handling or contacting inflammable and explosive
materials.
Processability
The processability of aluminum profile is excellent. In various
deformation and casting aluminum alloys, and in the various states
after the production of these alloys, the machining characteristics
have changed greatly, which requires special machine tools or
technologies.
Formability
The allowable deformation is controlled by specific tensile
strength, yield strength, ductility and corresponding processing
hardening rate.
Recyclability
Aluminum has high recovery, and the characteristics of recycled
aluminum are almost the same as that of primary aluminum.
Product Photos:
FAQ:
Q – What is the average lead time for pre production samples?
A – Our average lead time is normally 7 days for making new samples
and 7 days for testing , totally need about 14days.
Q – What is the average lead time for mass production?
A – Our average lead time is delivery within 20-30 days after
receive deposit and and moulds/samples are passed.
Q – What is CAD?
A – CAD stands for “computer assisted design” and it is a 3-D
program that is used by our clients to provide our technicians with
a three-dimensional example of the custom shape that they want made
at GUANGDONG YONGLONG ALUMINUM.Aluminium Window Profiles
Welcome to visit our company !
Choose us & contact us !
