6063 T5 High Hardness Windows Doors Aluminum Sliding Frame
Aluminium Extrusion
Aluminum Windows Doors Specification:
Frame material
In the material of doors and windows, the material connected with
the wall. Its main feature is that the surface of the joint with
the wall is mostly flat, fixed on the wall, and cannot be moved.
Fan material
Materials that can be opened in doors and windows. It is
characterized by the ability to move
central stile
The rectangle composed of frame material is divided into several
small rectangular materials.
Zhenzhongting: fixed on the frame material;
False middle support: fixed on fan material
Line pressing
On one side of the room, the profile used to fix the glass.
Round pressing line: suitable for 45 degree splicing
Square pressing line: suitable for 90 degree splicing
Performance introduction
1. Good heat preservation
K value -- heat transfer coefficient
Common aluminum alloy k = 207 w / (m2k)
Broken bridge aluminum alloy k = 2 ~ 4 w / (m2k)
2. Good sound insulation
Careful structural design and tight joints. Tested
3. Good air tightness
4. Good water tightness
5. Wind pressure resistance
The decorative surfaces on both sides are aluminum alloy with good
wind resistance, and the finished products of doors and windows can
reach grade 7
6. Fire resistance
Aluminum alloy is made of metal material and does not burn. Nylon
66 in the middle is flame retardant and does not burn. It is a
recognized flame retardant material
7. Security
Broken bridge aluminum alloy doors and windows, equipped with
excellent hardware, make thieves helpless.
Classification of aluminum profiles for doors and windows
By opening mode
a. Inward opening
1. Inside horizontal opening
2. Inside out inside out
b. Outward opening
1. Outward opening
2. Eversion
c. Push and pull
d. Folding
e. Promotion
According to the way of heat insulation
1. Non thermal insulation
2. Strip insulation
3. Thermal insulation by glue injection
Material distinction of frame and fan
Box: edge sealing, upper fixation, upper sliding, lower sliding,
upper fixation and lower sliding
Fan: top, bottom, high bottom, gouqi, Guangqi
Profile Specification:
| Description | 6063 T5 High Hardness Windows Doors Aluminum Sliding Frame
Aluminium Extrusion |
| Material Thickness(t) | 0.8-2.0 mm |
| Materiral | aluminum alloy 6063 |
| Annealing Treatment | T3-T8 |
| Color | Wood, Silver White ,Bronze , Champagne, Black, (RAL series)etc. |
| Surface Treatment | anodized, powder coated, electrophoresis, wood grain, polished and
etc |
| Shape | Square, Round, Flat, Oval, and according to customer's drawing. |
| Length | Normal length=6m or in customer's order |
| Usage | Building, Production Line, Decoration, Industrial, Transportation,
Door and window, etc. |
| Package | 1. Pearl cotton foam for each profile;
2. Wrap with shrink film exterior;
3. Packed according to customer request. |
| Advantages/Features | Providing colorful products with various mechanical
performances to adapt all kinds of architectural styles |
Aluminum Profiles Features:
Corrosion resistance
The density of aluminum profile is only 2.7g/cm3, which is about
1/3 of that of steel, copper or brass (7.83g/ cm3, 8.93g/ cm3,
respectively). In most environmental conditions, including in air,
water (or salt water), petrochemistry and many chemical systems,
aluminum can show excellent corrosion resistance.
conductivity
Aluminum profile is often selected for its excellent conductivity.
On the basis of equal weight, the conductivity of aluminum is
nearly 1/2 of copper.
Thermal conductivity
The thermal conductivity of aluminum alloy is about 50-60% of
copper, which is beneficial to the manufacture of heat exchanger,
evaporator, heating appliance, cooking utensil, cylinder head and
radiator of automobile.
Nonferromagnetism
Aluminum profile is non ferromagnetic, which is an important
feature for the electrical and electronic industries. Aluminum
profiles cannot be self ignition, which is important for the
application of handling or contacting inflammable and explosive
materials.
Processability
The processability of aluminum profile is excellent. In various
deformation and casting aluminum alloys, and in the various states
after the production of these alloys, the machining characteristics
have changed greatly, which requires special machine tools or
technologies.
Formability
The allowable deformation is controlled by specific tensile
strength, yield strength, ductility and corresponding processing
hardening rate.
Recyclability
Aluminum has high recovery, and the characteristics of recycled
aluminum are almost the same as that of primary aluminum.
Product Description:
FAQ:
Q – What is the average lead time for pre production samples?
A – Our average lead time is normally 7 days for making new samples
and 7 days for testing , totally need about 14days.
Q – What is the average lead time for mass production?
A – Our average lead time is delivery within 20-30 days after
receive deposit and and moulds/samples are passed.
Q – What is CAD?
A – CAD stands for “computer assisted design” and it is a 3-D
program that is used by our clients to provide our technicians with
a three-dimensional example of the custom shape that they want made
at GUANGDONG YONGLONG ALUMINUM.Aluminium Window Profiles
Q – What is a die?
A – A die is a tool that is used to help forge a custom shape
during the extrusion process. The die is made from durable steel so
that it can be used again and again to fill the client’s order.
Q – What does extrusion mean?
A – Extrusion is the process that is used to create custom shapes
from raw aluminum materials according to a client’s specifications.
The raw materials are heated and are then forced through a die to
create the desired shape using extreme pressure.
Welcome to visit our company !
Choose us & contact us !
