Electric PET Strap Making Machine 16mm Brick Kiln PET Bottle
Recycled Flakes Packing
PRODUCT DESCRIPTION
Pet packing belt one out two production line equipment:
Pet belt (commonly known as plastic steel belt) is a new type of
binding belt which is currently popular in the world to replace
steel belt. It is widely used in steel, aluminum, chemical fiber,
cotton spinning, paper industry, wood industry, building materials,
metal products and other industries.
PET Strap Production Line Machine List
| NO. | Item | Specification |
| 1 | Power | According to customer's factory voltage |
| 2 | Material | PET raw material or 100% PET bottle flakes recycled |
| 3 | Capacity | PETJT90:200kg/h PETJT100:250kg/h PETJT125:350kg/h |
| 4 | Product size | Width:9-32mm Thickness:0.6-12mm |
| 6 | Mid-height of extruder | 7000mm |
| 7 | Installation power | PETJT90:200KW PETJT100:250KW PETJT125:300KW |
| 8 | Humidity | <85% |
| 9 | Temperature | 0-40 degree |
| 10 | Cooling tower capacity | 30T/H or 50T/H |
| 11 | Installation Dimensions | PETJT90:45*2.0*7.0M PETJT100:45*2.0*7.0M PETJT125:60*3.0*8.0M |
| 12 | Product color | Green/Black/Pink/Yellow |
| 13 | Factory dimension | 35m*(3~6)m*(4~6)m 45m*(3~6)m*(4~6)m If your factory not big enough,please contact with us,our engineer
can according to your size to design |
Advantages of Plastic Strapping
- Savings : Polyester's unique qualities make it one of the best
strapping materials to use for securing any type of palletized or
unitized load
- Proven Performance : Open top and cosed rail car shipments of
Brick,Lumber and other panel products.
- Ease of Disposal : Polyester strapping can be easily disposed of by
rolling or bending.then recycled
- Elongation Recovery : Polyester strapping provides approximately 2%
elongation at normal work tension,which a;llows the materials to
stretch.the strapping will recover this elongation however,keeping
the strapping tight around the pacakge even if the load settles and
shrinks in size.
- Moisture and UV Resistant : Because it is plastic,it is moisture
resistant and therefore unaffected by rusting that might occur with
other packaguing alternatives which may stain or affect the quality
of your product before it gets to its destination. it is also UV
resistant to protect strapping from long periods of exposure to the
sun.
PET and PP strap making machine introduction
- Pre crystallization drying unit
As PET is easy to absorb moisture in the air, it must be fully
dried. At the same time, in order to prevent bonding during drying,
crystallization equipment needs to be configured. PP strap not need it.
Always PET two straps extrusion needs 90/30 single screw extruder.
PP two straps extrusion needs 75/30 single screw extruder.
Special design screw structurer could extrude PET PP materials
smoothl,it does not create excessive shear molecular structure, and
ensures the strength of the packing belt
- Filter, Melt Pumb, Exrusion Die Unit
It is controlled by PLC pressure closed loop control system. The
pressure sensor will transmit signals, and PLC is used to control
the speed of melt pump and extruder, so as to stabilize the
extrusion of PET or PP materials
- Water tank with first haul off rollers
PET is Length 4000mm, PP 2000mm.
It is stainless steel materials.
The water is heated by water tank heating unit
The haul off rollers is five rollers, working to take PET or PP
strap materials out of water tank
The oven is heated by electric power. Heating air is spread evenly
by fans.
In the oven, the PET and PP strap will be stretched first time.
This device is working for PET strap second time stretching.
PP strap not need stretching.
This 38Crmoal materials, high surface hardness rollers do embossing
- Annealing oven and cooling tank
As PET and PP materials has high deformation prestress after
stretching. It has to do annealing and water cooling to fix the
size.
It is working to take the materials out of annealing oven and
cooling tank before winders
The winder could be designed into servo motor unit, inverter motor
unit and torque motor according PET or PP materials.
The unique back tooth shaft is used to make the packing belts
neatly arranged without overlapping and no horn shape, so that the
packing belts maintain a good straightness, which is more suitable
for the use of automatic packing machines, and ensures that the
automatic equipment conveyor belts are in place. Do not drop the
belt.
