Industrial Dryer LPG Model Spray Drying Machine with 5kg/h 25kg/h
100kg/h 150kg/h Evaporation Capacity
Descriptions
Atomizing drying machine is the high efficient drying equipment, to
make dry powder or granule from liquid, emulsion, suspension and
pumpable pasty liquid, especially for thermosensitive material, it
can keep color, original flavor and chemical feature of raw
material, and the finished dry powder or granule have good
quality,purity, fluidity and solubleness.
This equipment features by high accuracy & speed & efficiency,
simple production process, labor-cost saving, widely applied in the
industry of chemical, food, pharmacy, biochemistry, light
industry,etc.
Principle
After been filtered and heated the air enters into the air
distrbutor on the top of the dryer.The hot air enters into the
drying room in the spiral form and uniformly. Passing through the
high-speed centrifugal sprayer on the top of the tower,the material
liquid will rotate and be sprayed into the extremely fine mist
liquid beads.Trough the very short time of contacting the heat
air,the materials can be dried into the final products.The final
products will be discharged continuously from the bottom of the
drying tower and from the cyclones. The waste gas will be
discharged from blower.
Features
- High drying efficiency
- The finished power or granule has good homogeneity, fluidity and
solubility.
- Simple and convenient operation
- Mechanical atomizer is adopted, and driven by gear, speed is
stable, which make sure the fogdrop is uniform.
- The direction and angle of hot air distributor is adjustable, which
ensure the fogdrop fully contact hot air. .
- Conjunction elbow is made of sanitary degree steel pipe, smooth
enough to avoide matereial blocked inside the pipe.
- Wide application: food, chemicals, ceramics, basic dyestuff, etc.
Centrifugal spray atomizer Features
1. The drying speed is high when the material liquid is
atomized,the surface area of the material will increase greatly.In
the hot-air flow,95%-98% of water can be evaporated at a moment.The
time of completing the drying is only several seconds. This is
especially suitable for drying the heat sensitive materials.
2. Its final products own the good uniformity, flow ability &
solubility. And the final products are high in purity and good in
quality.
3. The production procedures are simple and the operation and
control are easy.The liquid with moisture contents of 40-60%(for
special materials,the contents might be up to 90%).can be dried
into the powder or particle products once a time. After the drying
process, there is no need for smashing and sorting,so as to reduce
the operation procedures in the production and to enhance the
product purity.The product particle diameters,looseness and water
contents can be adjusted through changing the operation condition
within a certain range. It is very convenient to carry out control
and managment.
Technical parameters
| Model | PLG |
| 5 | 25 | 50 | 100 | 150 | 200-2000 |
| inlet temperatyre ℃ | 140-350 automatically controlled |
| outlet temperatyre ℃ | 80-90 |
| Max water evaporation capacity kg/h | 5 | 25 | 50 | 100 | 150 | 200-2000 |
| centrifugal spraying nozzle transmission mode | compressed air transmission | mechaical transmission |
| rotation speed (r.p.m) | 25000 | 18000 | 18000 | 18000 | 15000 | 8000-15000 |
| spraying desc diameter (mm) | 50 | 100 | 120 | 140 | 150 | 180-340 |
| max electric heating power (kw) | 9 | 36 | 63 | 81 | 99 | settled by customer |
| overall dimensions | 1.8*0.93*2.2 | 3*2.7*4.26 | 3.7*3.2*5.1 | 4.6*4.2*6 | 5.5*4.5*7 | depends on tryer |
| dried powder collection | ≥95 | ≥95 | ≥95 | ≥95 | ≥95 | ≥95 |
FAQ
Q: How can I visit your factory?
A: Our company is in Changzhou city, and it is very near Shanghai
city. It takes about 1 hour to get to Changchou. Or we can even
visit you in Shnghai.
Q: What’s the quality of your products?
A: Our products come with best quality, and passed CE
certification. And exported to lots countries around the world,
such as Australia, Malaysia, Vietnam, Philippines, Korea, Brazil,
Argentina, Russia, South Africa, etc. You can rest assured with the
quality absolutely.
Q: What to do if the machine has a problem?
A: 24 hours timely response of mail and phone calls. If the parts
broken belong to non-artificial factors within 12 months, we offer
free replacement. If beyond 12 months, customers should bear the
freight back and forth and accessories cost.
Q: How long is the warranty of your equipment?
A: One year.
Q: What is your payment term?
A: Our usual payment term is: 30% TT in advance, 70% TT before
shipment. Other ways can also be received after we both sides
discussion and agreement.
Q: Does your price include freight?
A: Our usual price is based on FOB Shanghai. If you request CIF,
please give us your delivery port, and we will give you CIF price.
