2 Pole Surge Protection Devices 600V Power Surge Protector DC Surge
Protective for Solar Photovoltaic Applications
2 Pole Surge Protection Devices 600V Power Surge Protector
Description:
• BRPV2 PV Surge Protective Device 40KA DC SPD suitable for the new
energy wind power generation system, its working voltage covers
500V, 600V, 800V and 1000V.
• Pluggable Surge Arresters Type 2 for Photovoltaic applications to
prevent the risks linked to lightning, compliant with IEC61643-31.
• It is installed in the main power system at DC circuit, to
protect against the indirect lighting current, direct lighting
current or other instantaneous over voltage.
2 Pole Surge Protection Devices 600V Power Surge Protector
Parameters:
| BRPV2 600 |
| SPD classification according to EN61643-31 | Type 2 |
| SPD classification according to IEC61643-31 | Class II |
| Max. continuous operating dc voltage Ucpv | 600V |
| Nominal discharge current (8/20us) In | 20kA |
| Max. discharge current (8/20us) Imax | 40kA |
| Voltage protection level Up | ≤2.6kV |
| Response time tA | ≤25ns |
| Operating temperature range Tu | -40℃-80℃ |
| Operating state / fault indication | green / red |
| Cross-section area (Min.) | 4mm2 |
| Cross-section area (Max.) | 35mm2 |
| For mounting on | 35mm Din rail |
| Enclosure material | Thermal plastic UL94-V0 |
| Degree of protection | IP20 |
| Order Code | B8013 |
| Order code(With remote signal) | B8015 |
Technology characteristic:
2 Pole Surge Protection Devices 600V Power Surge Protector
Features:
a. Module design, convenient installation, with easy electric
maintains operation.
b. Type 2 surge protector for DC power system
c. Built-in over current and over heat, temperature control open
circuit technology.
d. Imax - 40kA/pole (8/20 waveform)
e. Adopt independent intelligence property right and high
performance sensitivity resistance plates.
f. High energy anti-surge components MOV
g. Small creepage current, fast response time, remnant low voltage.
h. Failure status indicator, green/red
i. With remote connection, can realize remote control
2 Pole Surge Protection Devices 600V Power Surge Protector
Installation Notes:
• Installation must be performed only by electrically skilled
operator.
• Disconnect power before installing, no hot-line operation is
allowed, and better to under the guidance of professional
electrician.
• For best performance, mount protector in parallel with the
equipment it is protecting as close as possible. (*Note: If
protector is to be located outdoors and exposed to elements, mount
protector inside a suitable weatherproof enclosure.)
• Green tab, normal work status, Red tab, failure status, need to
be replaced rapidly.
Our Services:
• 17 years global leading profession manufacture of electrical
products surge arrester.
• All products will be well packed before shipping.
• Standard packaging, and you can also tell us your own
requirements on packaging.
• Faster delivery.
• Individually Tested Prior to Shipment.
Why need pv surge arrester?
Most of the solar modules are very regularly exposed to lightnings
and overvoltages, where lighting occurrences are frequent,
unprotected PV systems can suffer repeated and significant damage
to key components. And these systems represent a significant
investment cost, system downtime and the loss of revenue. PV
modules, DC cabling, inverters, AC cabling, as well as monitoring
systems must all be protecting as part of a in all-inclusive effort
to mitigate the damaging effects of lightning and surges. The use
of adapted surge protections is then highly recommended.
Certifications:
Company profile:
Wenzhou Britec Electric Co., Ltd. is a professional SPD
manufacturer, located in Yueqing, Zhejiang, China, Britec is the
specialized manufacturer of low voltage surge protection device.
With the advanced facility and technology, we make the first-grade
products for our customs. At present, Britec has export and import
rights, and our products has been sold to more than 50 countries in
the world.
Shipping:
FAQ:
Q: Are you Trading Company or Manufacturing Factory?
A: we are a professional manufacture with 17 years production
experience and 15 years export experience.
Q: I am interested in your products, could I get sample?
A: We are glad to offer samples.
Q: How about the Delivery time?
A: It is aboout 20 days.
Q: How can you guarantee the product quality?
A: We have the quality control system, and it's been followed
strictly. All product will be inspected before packing for double
checking, no matter where our product deliver to, we will be
responsible for its quality, customer's satisfaction is very
important for us, it matters whether we have next order.
Q: I'd like to know your Payment terms.
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30%
T/T in advance, balance before shippment. About other payment
terms, let's make a specific negotiation according to our order
situation.
