ITI Straumann RN Healing abutment - Ø 5.5mm, H 2mm/3mm/4.5mm
ITI Straumann Tissue Level® Implant Titanium Healing Cap Abutment
Compatible
RC Ø 5.5mm, H: 2mm/3mm/4.5mm
Material:
Ti 6AI-4V ELI (Supply from Germany)
Reference:
048.033S / 048.034S / 048.037S
Feature:
* Titanium interface abutment
* Precision machined up to ± 5µm
* Combination of high fatigue strength
* Superior level of biocompatibility
* Can production Custom Gingival Heights
Connection Type
RN (Regular Neck)
Height
2mm / 3mm / 4.5 mm
Diameter
Ø 5.5 mm
Implant Platform
Regular Neck Ø 4.8 mm
Material
Titanium
Implant Line
Tissue Level Implants
Implant Category
Healing Cap, Healing Abutment
Torque
Hand-tight
Tissue level and tapered effect implant
Fig. 1
All healing abutments employ the same Torx (SCS) driver tip
regardless of the implant/abutment platform diameter, except one NN
healing abutment catalog # 048.374, which uses a hex driver.
Narrow neck (NN) healing abutments (Fig.2, top row) are produced in three
versions, one plastic (3.4mm height), one metal (3.4mm height) and
a low profile (1.8mm) metal abutment.
Regular neck (RN) healing abutments (Fig.1) are offered in five configurations.
Three straight walled metal abutments in heights of 2mm, 3mm and
4.5mm. Two metal abutments with a bevel machined on one side of the
body. This bevel is intended to aide in proper tissue contour
development during the healing phase and should be changed to
Fig. 2
straight walled healing abutment after about three weeks. One of
the beveled abutments has a height of 2mm and the other has a
height of 3.5mm.
Wide neck (WN) healing abutments (Fig.2, middle and bottom row) are available
in three straight walled heights of 2mm, 3mm and 4.5mm. One beveled
abutment with a 2mm height to effect a more favorable tissue
contour during the initial healing period.
