Inconel 600 ,Nickel 600 Alloy Steel Sheets ,UNS N06600
Inconel 600 ,Nickel 600 Alloy Steel Sheets ,UNS N06600 overview
Inconel 600 is a nickel-base alloy with excellent carburization,
and good oxidation resistance at elevated temperatures. The alloy
has long been used in the heat treating industry for many of the
same applications as Alloy 330 . 600 alloy has useful resistance to
dry Cl2 and HCl gases at moderately elevated temperatures. Alloy
600 is not suggested for use at red heat when sulfur is present due
to elevated nickel quantities.
Grades 200 and 201 nickel are normally preferred for handling
concentrated, high temperature caustic. However, when sulfur
compounds are present as well, or for ammonium hydroxide service,
600 alloy is suggested. 600 alloy is subject to stress corrosion
cracking in hot, concentrated caustic alkalies. To avoid stress
corrosion cracking, the 600 alloy fabrication should be fully
stress relieved prior to use. A minimum treatment of 1650°F for 1
hour is suggested, but 1800-1850°F for 1 hour preferred.
Inconel 600 Plate is typically used in high temperature
applications. Compared to most stainless steel alloys, a Inconel
600 Clad Plate made from Alloy 600 material won’t lose shape as
easily when holding parts through a rigorous heat treat
application. Cutting of UNS N06600 Plate is often done with a
waterjet cutter. Internal threads can also be cut by single point
method on lathe, or by threadmilling on a machining center. Welding
Inconel Alloy 600 Plate is difficult due to cracking and
microstructural segregation of alloying elements in the heat
affected zone. But Inconel 600 Plate retains strength over a wide
temperature range, attractive for high temperature applications.
Alloy 600 Plate is oxidation and corrosion resistant materials well
suited for service in extreme environments subjected to pressure
and heat. Inconel Alloy 600 Foils also called with specification
like NA14 Plate, N06600 Plate, BS3076 Plate, ASTM B166 Plate,
2.4816 Plate, NCr15Fe (FR) Plate, NiCr15Fe (EU) Plate and NiCr15Fe8
(DE) Plate. Inconel 600 Flat Shim, Inconel 600 Perforated Plate &
Inconel 600 Rolling Sheets can be cold formed by standards methods.
Produc Forms : Sheet, plate , Coil , Strip .wire , Pipe, Tube ,Bar , Profile,
Round, Flat, Square, Hexagonal
Inconel 600 ,Nickel 600 Alloy Steel Sheets ,UNS N06600
Specification and Dimension Ranges
Specifications
AMS 5540, AMS 5665, ASME SB 166, ASME SB 167, ASME SB 168, ASTM B
166,
ASTM B 167, ASTM B 168, EN 2.4816, UNS N06600, Werkstoff 2.4816
| AMS 5540 | AMS 5580 | AMS 5665 | AMS 5687 |
| ASTM B166 | ASTM B167 | ASTM B516 | ASTM B517 |
| ASTM B163 | ASTM B168 | ASTM B564 | DIN 2.4816 |
| MIL N-23228 | MIL N-23229 | MIL N-6710 | MIL T-23227 |
Common Trade Names
Alloy 600, Inconel 600, Nickel 600
Some Normal specification at a glance
| ASTM | JIS | AISI | EN |
| Grade | S30100 | SUS301 | 301 | 1.431 |
| S30400 | SUS304 | 304 | 1.4301 |
| S30403 | - | 304L | 1.4307 |
| S31008 | SUS310S | 310S | 1.4845 |
| S31603 | - | 316L | 1.4404 |
| S32100 | SUS321 | 321 | 1.4541 |
| S41008 | SUS410S | 410S | - |
| S43000 | SUS430 | 430 | 1.4016 |
| S43932 | - | - | 1.451 |
| S44400 | SUS444 | 444 | 1.4521 |
| S44500 | SUS430J1L | - | - |
Dimension Ranges:
Width: 600mm~2030 mm
Thickness: 0.1~120.0 mm
Length: 300~6000 mm , Max 18000 mm
Surface Finish: No.1, 2B, BA, No.3, No.4, No.5, No.8, HL, Etching, SB,
Ti-coating,color-coating ,embossing .
Inconel 600 ,Nickel 600 Alloy Steel Sheets ,UNS N06600 Application
Super alloy inconel 600 is used in many application areas as listed
below:
- Heaters
- Heat exchangers
- Chemical process equipment
- Heat treatment furnace components
- Fixtures and gas turbine components.
Inconel 600 ,Nickel 600 Alloy Steel Sheets ,UNS N06600 Equivalent
| ISO NW6600 | UNS N06600 |
| JIS NCF600 | BS NA14 |
| JIS NCF600TP | NF NC15Fe |
| JIS NCF600TB | ASTM N06600 |
| SAE 11A | DIN 2.4640 |
| INCONEL® 600 | EN NiCr15Fe |
| Werkstoff 600 | DIN NiCr15Fe |
| Alloy 600 | ISO NiCr15Fe8 |
| Alloy 600 H | Nicrofer 7216 H |
| Nicrofer 7216 | Ferrochronin 600 |
Inconel 600 ,Nickel 600 Alloy Steel Sheets ,UNS N06600 Technical
datasheet
Chemical Composition
The chemical composition of super alloy Nickel 600 is outlined in
the following table.
| Element | Content (%) |
|---|
| Chromium, Cr | 14 - 17 |
| Iron, Fe | 6-10 |
| Manganese, Mn | 1 max |
| Copper, Cu | 0.5 max |
| Silicon, Si | 0.5 max |
| Carbon, C | 0.15 max |
| Sulfur, S | 0.015 max |
| Nickel, Ni | Remainder |
Physical Properties
The physical properties of super alloy Nickel 600 are tabulated
below.
| Properties | Metric | Imperial |
|---|
| Density | 8.4 g/cm3 | 0.306 lb/in3 |
| Melting point | 1399°C | 2550°F |
304 Alloy / 304L Stainless Steel Sheet - ASTM A240, ASME SA
Products display and Package Details
General Q and A Questions
Q: Would you provide samples For free?
A: Yes . with on stock specification We provide samples For Free .
Freight charge collect
Q: What information should i provide to source for the right
products ?
A: Material grade, width, thickness, coating and Purchase quantity
, Expected lead time ,etc
Q: What are the shipping ports?
A:Under normal circumstances, we ship from Shanghai, Tianjin,
Qingdao, Ningbo ports, you
can choose other ports according to your needs.
Q: About product prices?
A:Prices vary from period to period due to cyclical changes in the
price of raw materials.
Q: How long does your delivery time take?
A:In general, our delivery time is within 5-45 days, and may be
delayed if the demand is extremely
large or special circumstances occur.
Q: Can I visit your location?
A: Of course, we welcome customers from all over the world to visit
our factory. However, some
of the plants are not open to the public.
Q: Does the product have quality inspection before loading?
A:Of course, all our products are strictly tested for quality
before packaging, and unqualified
products will be destroyed.We provide All original Mill test
certificate and support third party inspection.
Q: How to pack the products?
A:The inner layer has a waterproof paper outer layer with iron
packaging and is fixed with a fumigation
wooden pallet. It can effectively protect products from corrosion
during ocean transportation.
Q: What is your working time?
A:In general, our online service time is Beijing time: 8:00-22:00,
after 22:00,
we will reply to your inquiry during the next working day.
904l Stainless steel sheet ,coil ASTM B625 UNS N08904 Application
