Main Technical Specifications
1 .Max Design Speed: 200m/min
2. Max.Working speed: 150/min (5-ply)
3. Max production width: 2000mm
Annotation: the Kraft paper for testing of the corrugation plant
line should keep the requirements as follows. (The temperature of
the surface of the heating parts in the corrugation plant line is
above 172 degree)
.Kraft paper’s level can not be lower than B level
.Water content: 11%±2%
.Face Paper: 100—250g/m2
.Core Paper:100--250g/m2
.Flute Paper: 100—200g/m2
4. Flutes combinations: A, C, B, E (or choose by the customer)
5. Steam requirements:
Steam cost: 4000 Kg/Hr Max pressure: 1.2Mpa
Practical Pressure: 0.8-1.2Mpa
6. Power supply: 410V 50Hz (Three phase four wire system)
7. Total Power: About 250 kw
Practical power cost: About 120kw
8. Area of the Production Line covers: About 90m×6m×5m (The
specific length is based on the foundation drawing)
9. Corrugated board stacking direction: left or right according to
the workshop to make sure the drive in left direction or right
direction.
10. Equipment suitability: Kraft paper A, B, C native paper or
imported Kraft paper.
