Semi-Automatic Hevery Duty Telescopic Bleacher Seating System
Retractable bleacher seating system material description:
1. Bleacher support is cold-drawn and formed of high-quality carbon
steel plates, which can increase the strength and toughness of the
material, improve the mechanical properties of the material, and
enhance the stability of the structure.
2. Load-bearing wheels: The load-bearing wheels are made of
wear-resistant PU wheels, with 40mm spokes and outsourcing
high-strength polyurethane, which has sufficient load-bearing
strength and appropriate elasticity. The inner layer uses double
ball bearings, the middle is a nylon layer, and is covered with The
high-toughness and wear-resistant polyurethane layer can withstand
heavy loads and rotate flexibly, with little friction, and does not
damage the wooden floor. The wheels of the stands are distributed
in multiple rows, each row is uneven, which can reduce the stress
on the wooden floor and extend the wood Floor life.
3. Load-bearing beam: The size of the load-bearing beam is 50×40×2,
100×50×3, which is installed at the maximum center distance of
about 70cm and welded between the main beam and the auxiliary beam.
The cold-rolled steel plate with sufficient bearing capacity is
used, and after folding, it is sprayed to make it not only has good
corrosion resistance, but also has a smooth and clean outer
surface. The secondary beam serves as the end element for all
wooden support arms and walking surfaces. The supporting arm
between the supporting frames is applied to the main beam to
eliminate sliding friction and lubricate the roller and nails
through the action of the mechanical surface.
4. The movable step: The movable step keel is supported by
high-quality carbon steel profiles, and the surface layer is made
of 18mm high-strength veneer laminate (17mm laminate + 1mm
trihydrogen ammonia board), which is fixed by rivets and auxiliary
stands of the stands to ensure the movable steps High strength and
structural stability.
5. Decorative profiles: The stand surface is covered with special
aluminum alloy, and is attached with special anti-skid lines to
increase the strength of the profile and prevent the audience from
slipping while walking. The front of the stand bed frame adopts a
special aluminum alloy profile to increase the bearing strength. At
the same time, the front edge is inlaid with non-slip and
wear-resistant rubber and plastic strips, so that they will not
fall off, and they can protect the aluminum-titanium alloy strips
and prevent the audience from slipping, which is both beautiful and
practical.
6. The synchronization mechanism is composed of double-layer guide
bearings and side rollers to ensure that the stands make a balanced
linear movement when they are telescopic, reducing the friction of
the stands. Through the self-locking mechanism, it is ensured that
the surface layers of the stands can be expanded and contracted in
sequence.
7. Railings: Railings are made of steel material (matte).
8. Seats and chairs: Front-mounted soft-packed seats (without
armrests), the grandstand seats are front-mounted, and the overall
dimensions of the seat surface: seat width × chair depth × chair
back height = 440 × 560 × 500 (mm).
9. Fixing the Telescopic Bleacher Seating.: After the movable stand
is in place, it can be fixed at the bottom of the stand and the
venue according to the needs of the site, so that it can be
stretched to the predetermined position at one time.
| Specifications |
| Product | Retractable bleacher/Telescopic bleacher |
| Material | Chair: HDPE chair or Fabric chair,flame retardant are optional |
| Structure Frame: Cold roll steel dealt with powder coating |
| Flooring: 18mm plywood with anti-slip finish or covered by carpet,
Or alumium floor |
| Safety Railing: Steel with powder coating or Stainless steel is
optional |
| Chair Type | Bench, Bucket chair, Foldable chair |
| Installation Type | Floore mounted type or Rise mounted type |
| Bleacher Type | Manual/Semi-Motorized/Ful-motorized |
| Operation | Wire control or remote control (Moterized type) |
| Color of Steel Structure | Black or Grey |
| Railings | Safety Railing on two sides of the bleacher, backside railing is
optional |
| Step Height | 260mm,280mm,300mm |
| Step Width | 700-900mm |
| Stair Step Width | 800-1000mm |
| Packing | PP woven bag, Carton, Air bubble film |
| MOQ | 100 seats per set |
| Delivery Time | 25-30 days according to the quantity |
| Application | Stadium, Conference Hall, Theatre, etc. |
Product customization process of Telescopic Bleacher Seating
1. Consultation: initial communication to reach cooperation
intention
2. Provide demand: determine the type of stand and seat style
3. Definite plan: design a reasonable plan and confirm
4. Sign the contract: quote and sign the production contract
5. Payment of deposit: collect deposit and schedule production
6. Delivery: delivery after payment of the balance
7. If there is demand, we can provide paid overseas installation
Why Choose Us?
Honest merchants: We insist on strict control of product quality,
rely on quality to expand the market, and encourage technological
innovation.
Quality Assurance: Over the years, we have been trusted by
customers with stable products, timely delivery, and excellent
after-sales service. We have a broad market and a good reputation.
Price commitment: In order to ensure the reliability of the
product, all materials selected are high-quality steel. Under the
same competitive conditions, on the basis of not reducing the
technical performance of the product, we will sincerely provide it
at a preferential price.
