Slag Muck Offscum Airflow Dryer 13KW With High Heat Transfer Coefficient

Airflow Type Airflow Dryer for offscum / discard / feigh / slag muck

Pneumatic and Airflow dryer drying machine is used to suspend the wet material in the process of air flow through the hot air flow. High heat transfer coefficient, large heat transfer area and short drying time. Airflow dryer drying is also known as "instantaneous drying", which is the application of solid fluidization in drying.

The method is to make direct contact with the heating medium and solid particles being dry, and make the stay dry solid particles suspended in a fluid, and two large contact areas, to strengthen the heat and mass transfer process, is widely used for material drying unit operation.

PCD Pneumatic Conveying Dryer Features

1. Powerful drying. Little invest and the amount of evaporated moisture is high ( from 50kgH2O/h to 2000kgH2O/h)

2. The drying time is short. The series is suitable in strong heat sensitive materials. The finished product is seperated from outside, and no pollution with high quality.

3. The equipment is a total set, the heat source can be shoose from steam, coal fuel, oil fuel and gas fuel hot air furnace.

PCD Pneumatic Conveying Dryer Application

Ceramic industry: Kaolin, bentonite, clay, etc.

Foodstuff industry: Soybean protein, gelatinized starch, vinasse, triticum, wheat starch, etc.

Organics: Atrazine, lauric acid cadmium, benzoic acid, sodium oxalate, acetyl cellulose, etc.

Dyestuff: Anthraquinones, black iron oxide, indigo dye, butyrate, titanium oxide, zinc sulfide, various azo dye intermediates, etc.

Inorganic: Borax, calcium carbonate, hydrogen peroxide, etc.

Substance: Copper suifate, ferrix oxide, three antimony oxide, all kinds of metal salt, synthetic cryolite, etc

PCD Pneumatic Conveying Dryer Technical Parameters

Type	Moisture(kg/h)	Equipped power(kw)	Occupied area(m2)	Height(m)
PCD50	50	7	16	9
PCD100	100	13	26	11
PCD200	200	21	35	11
PCD250	250	24	51	13
PCD500	500	43	78	13
PCD1000	1000	100	105	15
PCD1500	1500	150	200	16

PCD Pneumatic Conveying Dryer Maintainance

Daily maintenance contents:

(1). Check the automatic drain valve on the front filter before each shift.

(2). Check whether the change of tower and lift is normal.

(3). Check operating conditions, inlet pressure, inlet temperature and air flow.

(4). Check for moisture indicators, blue for dry and pink for moisture.

(5). Check whether the muffler is dirty, and the regeneration tower back pressure is too high to indicate that the muffler needs to be replaced.

(6). Check the pressure drop of the front filter and the back filter, if the pressure drops more than 0.5 bar, change the filter element.

Monthly maintenance contents:

(1). Check the control gas of the unheated and airflow dryer.Replace when necessary.

(2). Check the filter element of air flow dryer guide filter, if necessary, please replace it.

(3). Check the suction filter of air flow dryer, if necessary, please replace it.

Maintain content quarterly:

Check the front and rear filters, check for blockages and possible damage, and replace them as needed. Purge the relief valve with compressed air. Check the dew-point status of the output.

PCD Pneumatic Conveying Dryer Sketch of Structure

PCD Pneumatic Conveying Dryer Show

Contact Me

Jiangsu Guojin Drying Technology Co.,Ltd. specializes in the research and development and manufacture of drying, mixing, granulating, crushing, conveying, screening and other equipment. It has now become a large-scale enterprise in the drying equipment industry and a designated production enterprise of China Chemical Equipment Corporation. Especially, it has unique advantages in mesh belt type, hollow blade, disc type, rake type, fluidized bed, flash evaporation, airflow, spray, vacuum drying equipment, calcination, etc. Widely used in chemical, pharmaceutical, food, environmental protection, building materials, electronics, feed and other industries. Tens of thousands of users are spread all over the country and sold to more than then countries.

The company is located in Sanhekou Development Zone, Tianning District, Changzhou City, the birthplace of China's drying equipment industry. It is adjacent to Beijing-Shanghai Expressway, Shanghai-Nanjing Railway and Hengshan Crossing of Shanghai-Nanjing Expressway, 5km away from Shanghai in the east, Wuxi and Suzhou in the south, and the Yangtze River in the north.

The company has complete processing equipment. There are several sets of manufacturing equipment such as lifting, welding and cutting. It has excellent product development environment and production environment. The company has adopted advanced management methods and established a perfect quality assurance system.

Our company has established a set of perfect after-sales service system, which tracks and monitors all ex-factory products and the users are satisfied. "work with great care and keep improving" is the company's requirement for emplyees. Facing the increasingly standardized domestic and foreign markets, the company adheres to the corporate philosophy of "open competition, cooperative innovation, balance of interests and common development" and faces up to challenges with the belief of winning.