50x100mm gabion wire mesh boxes garden stone wall
1. Finishing: heavy duty galvanized or galfan galvanized
2. Surface treatment: electro galvanized, hot-dipped galvanized,
pvc coated, stainless steel
3. Wire diameter: 2.7--5mm
4. Mesh size/opening: 37.5x75mm, 50x50mm, 75x75mm, 100x50mm,
100x100mm
5. Zinc coating: 40-290g/mm2
6. Application: Flood dam, dam and diversion, Prevent soil erosion,
bridge protection, retaining wall, road protection
7. Feature:easy to install, beautiful structure, low cost, it is
the best choice for garden decoration greening slope.
Architectural gabion Specification:
1) Material: Low carbon steel; galvanized steel2) Gabion box Length: 1m; 2m; 3m; 4m or as your request.
3) Wire diameter: 4.0mm--6.0mm
4) Spiral wire diameter: 4.5mm--6.5mm
5) Surface treatment:
a. Hot dipped galvanized: galvanized steel wire tensile strength
350-550 mpa/mm2 , zinc contect max up to 350g/m2
b. Galfan coating (Zn-5%Al-MM or Zn-10%Al-MM): steel wire tensile
strength 350--550 mpa/mm2 , corrosion resistance is 3 times of galvanized.
c. Hot dipped galvanzied+PVC coated
d. Galfan coating+PVC coated
6) ASTM standard: ASTM A 856; ASTM A 641
How to install welded gabion box?
1. Ends, diaphragms, front and back panels are placed upright on
the bottom section of wire mesh.
2. Secure panels by screwing spiral binders through the mesh
openings in adjacent panels.
3. Stiffeners shall be placed across the corners, at 300mm from the
corner. Providing a diagonal bracing, and crimped over the line and
cross wires on the front and side faces. None are needed in
interior cells.
4. Gabion box filled with graded stone by hand or with a shovel.
5. After filling, close the lid and secure with spiral binders at
the diaphragms, ends, front and back.
6. When stacking tiers of the welded gabion box, the lid of the
lower tier may serve as the base of the upper tier. Secure with
spiral binders and add pre-formed stiffeners to exterior cells
before filling with graded stones
4mm wire square hole size welded mesh gabions stone cage
specifications as below
| Nominal Box sizes ( m) | No. of diaphragms (no.) | Capacity per box (m3) |
| 1.0 × 1.0 × 0.5 | Nil | 0.50 |
| 1.0 × 1.0 × 1.0 | Nil | 1.00 |
| 1.5 × 1.0 × 0.5 | Nil | 0.75 |
| 1.5 × 1.0 × 1.0 | Nil | 1.50 |
| 2.0 × 1.0 × 0.5 | 1 | 1.00 |
| 2.0 × 1.0 × 1.0 | 1 | 2.00 |
| 3.0 × 1.0 × 0.5 | 2 | 1.50 |
| 3.0 × 1.0 × 1.0 | 2 | 3.00 |
| 4.0 × 1.0 × 0.5 | 3 | 2.00 |
| 4.0 × 1.0 × 1.0 | 3 | 4.00 |
