High Durability, Long Service Life Suitable For Any Weather
Conditions Uniaxial Plastic Geogrid
Uniaxial Plastic Geogrid Introduction
Plastic uniaxial geogrid is manufactured from plastic materials
which may be high-density polypropylene or high-density
polyethylene (HDPE) resins by the hot extruding process to make the
resins into thin plates, the plates are punched into the regular
holes for the formation of desired grids, and then the punching
patterns are stretched longitudinally into the desired meshes to
develop designed tensile strength.
Uniaxial Plastic Geogrid Specification
| Properties | GG60PP | GG80PP | GG110PP | GG150PP | GG260PP | GG300PP |
| Tensile Strength (kN/m) | 60 | 80 | 110 | 150 | 260 | 300 |
| Elongation Ratio | ≤10% | ≤10% | ≤10% | ≤10% | ≤10% | ≤10% |
| Strength at 2% Elongation (≥kN/m) | 17 | 26 | 32 | 45 | 94 | 105 |
| Strength at 5% Elongation (≥kN/m) | 35 | 48 | 64 | 90 | 185 | 195 |
| Roll Length (m) | 100 | 100 | 50 | 50 | 50 | 50 |
| Roll Width (m) | 1-3 | 1-3 | 1-3 | 1-3 | 1-3 | 1-3 |
Uniaxial Plastic Geogrid Application
1. Uniaxial plastic geogrid for sale used to reinforce weak
foundations.
2. Uniaxial plastic geogrid is used for reinforcing asphalt or
cement pavement.
3. Uniaxial plastic geogrid is used to reinforce embankment slope
and retaining wall.
4. Uniaxial plastic geogrid is used to reinforce river and sea
embankments.
5. Uniaxial plastic geogrid for sale is used to treat landfills.
Special use of unidirectional geogrid: low temperature resistance.
Adapt to - 45 ℃ - - 50 ℃. It is suitable for Poor Geology of less
frozen soil, rich ice frozen soil and high ice content frozen soil.
