Strength Road Construction TGDG 80KN High Tensile Polypropylene
Uniaxial Plastic Geogrid
Uniaxial Plastic Geogrid Introduction
Uniaxial Plastic Geogrid is a kind of high strength geomembrane
with high polymer as main raw material, adding certain anti
ultraviolet and anti-aging AIDS, and unidirectional stretching to
make the original scattered chain molecules rearranged in a linear
state, extruded into thin sheets, then punching regular holes, and
then longitudinally stretched. In this process, the polymer is in a
linear state, and a long elliptic network structure with uniform
distribution and high node strength is formed. This kind of
structure has very high tensile strength and tensile modulus. The
tensile strength reaches 100-300kn / m, which is close to the level
of low carbon steel. It is much better than the traditional or
existing reinforced materials. Especially, this kind of products of
the company have super international high early tensile strength
and tensile modulus with elongation of 2% - 5%. It provides an
ideal linkage system for soil to undertake and diffuse forces. The
product has high tensile strength (> 150MPa) and is suitable for
various soils.
Uniaxial Plastic Geogrid Specification
| Properties | GG60PP | GG80PP | GG110PP | GG150PP | GG260PP | GG300PP |
| Tensile Strength (kN/m) | 60 | 80 | 110 | 150 | 260 | 300 |
| Elongation Ratio | ≤10% | ≤10% | ≤10% | ≤10% | ≤10% | ≤10% |
| Strength at 2% Elongation (≥kN/m) | 17 | 26 | 32 | 45 | 94 | 105 |
| Strength at 5% Elongation (≥kN/m) | 35 | 48 | 64 | 90 | 185 | 195 |
| Roll Length (m) | 100 | 100 | 50 | 50 | 50 | 50 |
| Roll Width (m) | 1-3 | 1-3 | 1-3 | 1-3 | 1-3 | 1-3 |
Uniaxial Plastic Geogrid Feature
1,High tensile strength
2,High tensile modulus
3,Higher load bearing capacity
4,Excellent soil stabilization
5,Good sub-base reinforcement
6,Heavy duty foundation support
7,Anti-corrosion, erosion control
8.Easy to construct, fast deployment
9.Suitable for any weather conditions
10.Land optimization and land utilization properly
Uniaxial Plastic Geogrid Application
1. Uniaxial plastic geogrid for sale used to reinforce weak
foundations.
2. Uniaxial plastic geogrid is used for reinforcing asphalt or
cement pavement.
3. Uniaxial plastic geogrid is used to reinforce embankment slope
and retaining wall.
4. Uniaxial plastic geogrid is used to reinforce river and sea
embankments.
Quality Control:
We have established a national-standard laboratory for in-house
quality control and built a strict quality control system in all
aspects from raw materials testing and production processes to
final product quality testing.
Not only is stringent internal quality control carried out at OBOR,
but regular testing and analyzing of our product performance is
implemented by authoritative testing organizations in Europe and
the United States.
