Flexible Installation Black Smooth High Density Polyethylene
Cellular Confinement System
Cellular Confinement System information
Cellular Confinement System(CCS)--also known as geocell, it is a
kind of three-dimensional network structure shaped by high-strength
HDPE (high density polyethylene) sheets through ultrasonic welding
of high strength. The depth of the geocells as well as the size of
each cellular unit can vary as per design requirements. The surface
of geocells are smooth or textured, the textured geocells increase
soil-geocell wall friction. Geocells can be perforated or
non-perforated. If the depth of geocell is over 10cm, the geocell
can be perforated, the geocell wall is punctured to assist in
immediate dissipation of developed porewater pressures due to
increased stresses within the infill of the individual cells.
Cellular Confinement System Specification
1. Cell depth: 50mm,100mm,150mm,200mm,250mm,300mm
2. Welding distance: 330mm~1600mm
3. Thickness: 1.0mm,1.2mm(smooth), 1.5mm,1.8mm(textured)
4. Appearance/surface: smooth/textured
| Item | Main Specification |
| Weld Spacing | 330mm to 1600mm |
| Cell Height | 50mm to 300mm |
| Seam Peel Strength | 1000N, 1100N,1200N,1420N |
| Color | Black, Green, Sand, pray |
| Surface | Smooth/Textured/Perforated |
Cellular Confinement System construction method
1, Open the geocell.
2,Fixed with nails or connected with the framework of stretching
device.
3, Fill the particle filler until the full and beyond standard room
to the top, then vibrate or roll to finish the primary work.
4,At this point, cell chamber system can support all kinds of
construction equipment. The construction can be done directly in
the above.
Cellular Confinement System Advantage
1,Virgin HDPE basic with Unique Formula.
2,Various weld spacing available from 330mm to 1600mm
4,Various strip height available from 50mm to maximum 300mm
5,Maximum strip length reaches 8m, expanded width reaches 6m.
