Reinforce Road Bed Flexible Transportation High Strength HDPE
Cellular Confinement System
The History Of Cellular Confinement System
The Army Corp of Engineers invented 3D geocelluar grids in the
1970’s. The geocell was designed for quick installation on beaches
for amphibious beach assaults. It could be stored and moved in a
very compact form, expanded and filled with sand, and ready at an
instant for supporting vehicles, which would otherwise get stuck in
the sand. The geocells were also used extensively in Desert Storm.
Soldiers would spread the geocells out in the desert, fill cells
with sand, and drive tanks and trucks on them. They would even land
planes on them! The geocells could easily be removed when no longer needed.
Cellular Confinement System Specification
1. Cell depth: 50mm,100mm,150mm,200mm,250mm,300mm
2. Welding distance: 330mm~1600mm
3. Thickness: 1.0mm,1.2mm(smooth), 1.5mm,1.8mm(textured)
4. Appearance/surface: smooth/textured
| Specification | cell height Hmm | welding spacing: AMM | welding spacing: AMM | weld tensile strength: kn |
| GS20 | 200 | 400 | 25 | 2 |
| 330 |
| GS15 | 150 | 400 | 25 | 1.5 |
| 330 |
| Gs10 | 100 | 1000 | 25 | 1 |
| 470 |
| 400 |
| 330 |
| GS8 | 80 | 1000 | 25 | 0.8 |
| 470 |
| 400 |
| 330 |
| GS5 | 50 | 470 | 25 | 0.5 |
| 400 |
| 330 |
Confinement System Construction Method
1, Open the geocell.
2,Fixed with nails or connected with the framework of stretching
device.
3, Fill the particle filler until the full and beyond standard room
to the top, then vibrate or roll to finish the primary work.
4,At this point, cell chamber system can support all kinds of
construction equipment. The construction can be done directly in
the above.
