Brass Coil Heaters Brass Coil Heater MICC Thermocouple Brass Hot
Runner Coil Heaters
Description:
Hot runner Coil Heater is made of nickel chrome resistance wire placed inside chrome
nickel steel tube that is filled with MgO powder. It has round,
squre and flat sections. The surface treatment can be polishing and
sand blasting.And it can be connected with K, J, or E type
temperature control thermocouples. Spring coil heater is widely
used in heating engineering, mold, plastic industry, extruder and
hot nozzle, etc.
Specification:
1. Maximum Sheath Temperature: 700°C
2. Inner Diameter: 8-38mm( + 0.05mm)
3.Coil style Length: 40-200mm (+ 0.5mm)
4.Staright style length:200-3000mm (+ 0.5mm)
5.Cross-section:
Round Dia.3mm;3.3mm;3.5mm
Square: 3x3mm;3.3x3.3mm,4x4mm,
Rectangular:4.2x2.2mm,4x2mm;1.3x2.2mm
6. Available Sheath: nylon,metal braided,fiberglass ,silicone
rubber, kevlar
| Copper/Brass Coil Heater Nozzle Band Heater |
| |
| |
| 1.5mm , 1.8mm, 1.3x2.3 mm |
| |
| Screw, Plug, Ceramic Block, Lead Wire and so on |
Built-in thermocouple | With or without J/K thermocouple |
Insulation Resistance | 10 MW @ 500V DC |
Power tolerance | ± 10% (Tighter Tolerance available) |
Current Leakage | < 0.5 mA @ 253 V AC |
Unheated Length | Minimum 25 mm plus adapter connection |
Minimum Bending diameter | 6mm |
Application:
* Injection moulding machine nozzle
* Hot Runner Nozzles & Bushings
* Packaging machinery
* Hot runner Injection moulds
* Injection & Blow Moulding Machine Nozzles
* PET preform & Thin wall container Moulds
* Hot runner Manifolds
