Hard Capsule Liquid Filling Machine
Product Description of Capsule Filling Machine
The liquid capsule filling machine is a new capsule filling machine
specially designed for filling liquid, which fills the gap of
liquid filling and sealing technology for hard capsules in China.
This series of honey water liquid capsule filling machine, with
accurate
loading and good sealing, improves the safety of the products in
the process of storage, transportation and clinical application of
products. This liquid capsule filler machinery has wide
applicability.
Main Technical Parameters
| Model | SED-260YJ-C |
| Weight | 600KG |
| Overall dimensions | 1020×860×1970mm |
| Motor Power | 5.75kw |
| Power supply | Three-phase four-wire AC 380V; 50Hz |
| Capacity | 15600pcs/hour |
| Fillable capsule | 00#～5# Safety capsule A～E |
| Capsule sowing accuracy | ≥99.5％ |
| Working noise | ≤75dBA |
| Filling volume difference | Liquid above 300mg≤±3% |
| Compressed air | 0.06m3/min 0.3Mpa |
| Water source requirements | The water ring vacuum pump is used for recycling with the water
tank (It can also be connected to an external water source) |
| Vacuum | -0.02～-0.06 MPa |
| Water source | 250L/h |
| Inlet pipe inner diameter | 20mm |
| Drain pipe inner diameter | 27mm |
| Working temperature | 21℃±3℃ |
| Relative humidity of working environment | 40～55％ |
| Exhaust volume | 300m3/h |
Characteristic of Capsule Filling Machine
1.This series liquid capsule filling machinery capsule suction,
capsule outlet, locking and waste rejection adapt double sealing
device, one is imported NBR sealing rubber which prevents the loss
of lubricating oil.
2.This pharmaceutical honey capsule filling machine has safety
firs, all the working stations take full account of the personal
safety, such as the door control and emergency stop switch.
3. Equipped with on-line air pressure die cleaning system, the
upper and lower dies are clean and without dust, improve the sowing
effect.
4. The liquid capsule filler machinery is precision mold
concentricity, zero deviation, ensure that the capsule is not
wiping, no damage.
5. All the parts of the contact drug of pharmacy equipment are made
of stainless steel 316, and the waste device adopts seven lines of
aero aluminum.
Application
