Camlog® Deantal Implant Analog Compatible with
3.3mm/ 3.8mm/ 4.3mm/ 5.0mm
Material:
Stainless Steel 303F / Titanium GR5
Feature:
* Reproducibility
* Precision machined up to ± 5µm
* Position indicator & Level stopper for 3D print & Stone model
* Anti-rotate design
Head that reproduces the implant system joint.
Position indicator and level stopper support precise positioning of
removable gingiva mask.
Gentle retaining area to easily position the soft gum in the
working model.
Effective circuit and self-locking cross retainers that, inside the
plaster, provide extraordinary embedding even in cases of abutment
drilling on model.
Its discrete size means that analogues can be easily fitted,
despite the implants being close together or not parallel.
Approved by CE, ISO 9001, ISO 13485
Points of Camlog™ Analog:
Camlog™ implants and components are distributed through Henry
Schein® in the USA.
Fig. 1
Fixture level analogs are color coded in compliance with the
Camlog™ color coding scheme silver (no color), yellow, red, blue
and green. The 3.3mm analog is silver (catalog # J3010.3300), 3.8
yellow (catalog # J3010.3800), 4.3 red (catalog # J3010.4300), 5.0
blue (catalog # J3010.5000) and the 6.0mm analog (catalog #
J3010.6000) is green. SCREW-LINE™ implants maybe impressed and
restored with special platform switching components and the above
listed analogs are utilized for platform switched impression
copings and abutments.
Fig. 2
Abutment level analogs for already installed Logfit™ abutments are
not color coded for platform diameter identification. Logfit™
abutments are not produced for 3.3mm platform implants, therefore
no corresponding abutment level analogs are available for 3.3mm
platform Logfit™ abutments. The 3.8mm platform analog catalog
number is J2552.4300, 4.3mm platform J2552.4300, 5.0mm J2552.6000
and 6.0mm platform Logfit™ analogs utilize the same analog as 5.0mm
platform Logfit™ abutments (catalog # J2552.6000).
