Capsule Filling And Sealing Machine for Size 00-4
Working Principle of Capsule Filling Machine
The working principle of the automatic capsule filling machine is
divided into two parts, which are the movement of the capsule and
the filling of the medicine:
1. Movement of the capsule
During the filling process of the intermittent capsule filling
machine, the movement of the capsule depends on the indexing box
for intermittent and discontinuous rotation. The filling volume of
the capsule is mainly determined by the volume of the metering
disc hole. The hollow capsule is in the capsule hopper, the main
board moves up and down, the capsule enters the capsule guide
groove by its own gravity, and then the horizontal fork and the
vertical plug make the capsule cap upward and the
capsule body downward into the upper and lower modules. The capsule
body and capsule cap are separated under the action of the device,
and then the module enters the powder filling station.
2. Drug filling
The sensor in the powder holding ring controls the screw feeding
rod above it, and the medicine is continuously added to make the
height of the powder in the powder holding ring constant. position,
push the drug column into the capsule body. After that, it
enters into the capsule rejection, capsule locking, finished
capsule discharge, module cleaning station in turn, and then enters
a new round of station cycle, and the cycle begins again and again.
Detailed Parameters of Capsule Filling Machine
| Model | SED-200J-H |
| Capacity | 200 capsules/min |
| Filling Material | Powder, Granules |
| Die Hole Number | 2 |
| Power Supply | 380V 50Hz 3P |
| Total Power | 3.75KW |
| Application | 00#-4# capsule |
| Filling Variation | ±3% - ±4% |
| Noise | ≤78dB(A) |
| Qualified Rate | ≥99.5% |
| Overall Dimension | 800mm (L) x 970mm(W) x 1870mm(H) |
| Weight | 600kg |
Characteristic of Capsule Filling Machine
1.The equipment features small footprint, low energy consumption,
easy operation and easy maintenance.
2.Mold replacement is convenient and accurate.
3.The design of underslung cam and pressure atomizing oil pump
keeps the lubrication in the cam groove, reduces wear and prolongs
the service life of parts.
4.Using high-precision indexing drive, the vibration is small, and
the working noise is lower than 78db. The vacuum positioning
mechanism is used to make the capsule qualified rate reach more
than 99.5%.
5.Based on the lower plane of the dosage plate, three-dimensional
adjustment and uniform gap, the filling accuracy can be effectively
ensured, and it is very convenient for cleaning.
Equipped with a touch screen, when there is a lack of material or
capsules or a failure in the feeding channel, it will automatically
alarm and stop automatically; real-time display of the metering of
each capsule and the cumulative output.
Product Show of Capsule Filling Machine
