800mm Belt Conveyor Unloading Machine With 2.2kw Device
The belt conveyor unloading machine is used to unload the materials
transported by the TD75 and DTII series belt conveyors to any place
in the middle of the conveyor, and use the site to accumulate
materials or distribute materials in the maximum range. The belt
conveyor unloading machine has the characteristics :
1.compact and reasonable structure,
2.stable use, long service life,
3.easy maintenance and low maintenance cost.
4.It is widely used in mining, power, metallurgy, coal, port,
building materials and other industries.
working principle
The belt conveyor unloading machine is driven by the motor on the
car through the speed reducer and chain to make the trolley move
back and forth on the guide rail of the conveyor frame. The
material transported by the conveyor reaches the position of the
trolley and falls into the unloading funnel of the trolley, thus To
achieve the purpose of unloading at any point in the middle of the
conveyor.
Structure composition
① Walking light rail. The walking light rail is erected on the
conveyor and used as a supporting and running track for walking
steel wheels.
② receiving funnel. The material is transported to the receiving
funnel via the conveyor belt, and then the deposit is dispersed to
the chute.
③ Chute. Like all head chutes, the chute of the unloading trolley
includes double-sided discharge and single-sided discharge.
④ Walking drive structure. Because the unloading trolley can move
by itself, it needs to install walking driving structure. The
walking drive structure is composed of a motor reducer.
Technical datas for reference
| Electric Motor | Model | Y112M-6 |
| Power | 2.2KW |
| Speed | 960RMP/MIN |
| Reducer | Model | ZQ25-31.5-II Z |
| Gear ratio | 31.5 |
| Speed of unloading | 0.34m/s |
| Increase belt length | 3.5m |
| Rail Model | 15kg/m |
Use attention
① For the material with too much dust, the slot sealing device of
the trough can be installed.
② If the original conveyor is not equipped with a belt conveyor
unloading trolley, the latter is added, the intermediate frame and
the outriggers should be reinforced to ensure the strength and
rigidity during operation.
③ The speed of the belt conveyor is controlled below 2.5m / s, and
the unloading trolley can run smoothly.
