Notes for customization of solenoid products:
1. It is necessary to provide the working voltage and current
characteristic power supply (DC DC / AC AC), positive and negative
pulse power supply, etc;
2. Size of required solenoid products: length, width, height,
stroke and suction requirements, reset requirements after power
failure, etc;
3. Duty cycle of electromagnet products: long time power on,
continuous power on, intermittent power on; intermittent power on
for a long time each time and the interval between two times of
power on
Dimensional drawing
Action diagram
Material description:
1. Armature: TISCO dt4c electrical pure iron
2. The Curie temperature curve is demagnetized without remanence
3. Copper base H62 copper, surface passivation treatment
anti-oxidation
4. Brilliant material: Teflon tape, good insulation performance, in
line with environmental requirements
5. The bayonet is made of imported stainless steel.
6. The armature was plated by electroless nickel plating, and the
salt spray test lasted for 72 hours
7. The enameled wire adopts high-quality enameled wire imported
from Germany, the temperature resistance grade is above 210
degrees, and the withstand voltage is more than 2000 v
Supply Ability
Supply Ability:100000 Piece/Pieces per Month
Packaging & Delivery
PortGuangdong, shenzhen
Lead Time :| Quantity(Pieces) | 1 - 500 | 501 - 1000 | 1001 - 5000 | >5000 |
| Est. Time(days) | 10 | 15 | 20 | To be negotiated |
