Performance advantages:
1. The solenoid core is wear-resistant, good impact resistance, and
the top is not damaged after long-term use
2. The iron core can move flexibly and react quickly
3. The bobbin is made of DuPont material with high temperature and
wear resistance
4. When the temperature rises from 50 ℃ to 220 ℃, the suction is
still stable and safe
5. The spring force is still stable when the temperature rises from
50 ℃ to 220 ℃.
Longer service life without oil immersed iron core
7. Accurate positioning of iron core operation
8. During high frequency operation, the iron core moves stably
without shaking
9. High voltage resistance can reach 1500V ~ 1800V / 2mA
10. The electromagnet coil is made of German enameled wire.
11. The coil has good conductivity, low power consumption, low
calorific value, temperature resistance of 180 ℃ and the highest
temperature of 210 ℃.
12. All materials used for making electromagnet are treated with
environmental protection, which is safe and reliable.
13. The iron core is made by special technology. Wear resistance,
good impact, long-term use of the top without wear.
14. The retaining electromagnet adopts high-quality magnet, with
stable magnet suction, safe and reliable
15. The support will not fall off after more than 500000 times of
normal operation
16. It operates normally at 250 ℃.
Dimensional drawing
Material description:
1. Armature: TISCO dt4c electrical pure iron
2. The Curie temperature curve is demagnetized without remanence
3. Copper base H62 copper, surface passivation treatment
anti-oxidation
4. Brilliant material: Teflon tape, good insulation performance, in
line with environmental requirements
5. The bayonet is made of imported stainless steel.
6. The armature was plated by electroless nickel plating, and the
salt spray test lasted for 72 hours
7. The enameled wire adopts high-quality enameled wire imported
from Germany, the temperature resistance grade is above 210
degrees, and the withstand voltage is more than 2000 v
Supply Ability
Supply Ability:100000 Piece/Pieces per Month
Packaging & Delivery
PortGuangdong, shenzhen
Lead Time :| Quantity(Pieces) | 1 - 500 | 501 - 1000 | 1001 - 5000 | >5000 |
| Est. Time(days) | 10 | 15 | 20 | To be negotiated |
