WEIGHT INDICATOR-UNIVERSAL REPEATER DGT100: MAXI WEIGHT INDICATOR-
UNIVERSAL REPEATER
Weight indicator/ repeater with large matrix display composed of
very intense bright LEDs. Particularly suitable for outdoor uses,
it is clearly visible even in full sunlight and where it's
necessary to view from a distance at any angle. Case completely in
IP68 stainless steel. CE-M approved (OIML R-76 / EN 45501). MID
approved (OIML R-61).
MAIN FEATURES
Functional 5-key waterproof keypad.
Large 6-digit display, 100 mm high, with very efficient SMD LEDs,
complete of 6 Leds for indication of active functions, visible from
over 25 m, with viewing angle up to 120° and with power up to 750
mcd.
Software adjustment of the brightness intensity by keyboard.
AISI 304 stainless steel case with IP68 protection complete of wall
fixing bracket.
Fitted with an anti condensation air valve for regulating the
humidity and the pressure inside the indicator.
Calibration, Set-Up parameters, configurable from keyboard or from
PC with DINI TOOLS.
Max. 10.000e or multirange 2 x 3000e @ 0,3 µV/d in CE-M approved
version for legal for trade use.
Max. 1.000.000 displayable divisions viewable with internal
resolution up to 3.000.000 points.
Up to 8 signal linearisation points with DINITOOLS.
A/D 24 bit sigma-delta 4-channel conversion, max.200 conv./sec.
with automatic selection.
Connectable with up to 8 analogue load cells with 350 Ohm input
resistance.
Management of a weighing system with up to 4 cells with digital
equalisation or management of up to 4 independent weighing systems.
Power supply from 12 to 24 Vdc with 110-240 Vac internal power
supplier.
Available as Scale or as Repeater version.
MAIN CERTIFICATIONS
EU Type Examination Certificate (45501:2015)
OIML R76
OIML R61 - MID
OIML R51
I/O SECTION
RS232/C bidirectional port configurable for connection to printer,
PC, or other external units.
RS485 bidirectional port configurable for connection to PC, PLC, or
other external units.
PROFIBUS serial interface (DGT100PB model).
2 photomosfet outputs: 150 mA 48 Vac / 150 mA 60 Vdc (NO), with
configurable functions.
2 optoisolator photocouplers: 12÷24 Vdc, 5 mA min - 20 mA max, with
configurable functions.
16-bit analogue output (DGT100AN model) 4-20mA / 0-5Vdc / 0-10Vdc
at choice; maximum applicable voltage: 350 Ohm; minimum applicable
voltage resistance: 10 kohm.
DGT100BC / DGT100AN / DGT100PB FUNCTIONS
THROUGH KEYBOARD:
Zeroing; Semi automatic and presettable tare, print and/or data
transmission; ON/Stand-by.
SELECTABLE:
High Resolution Weighing x 10; Net/Gross or lb/kg conversion;
Weighs totalisation; Formulation; Approved transmission of the
weight to PC/PLC (with ALMEM Alibi memory option); Counting; In/Out
Truck weighing; Hold e Peak.
EXTERNAL INPUT:
Simulation of key pressure; Keyboard lock.
MOSFET OUTPUT:
Set Point Control on the weight, either positive (in loading) or
negative (in unloading), or on the pieces (counting mode), with
programmable enabling/disabling thresholds, as direct check or upon
weight stability.
SERIAL PORTS:
On all models: Reading of the net, gross, and tare weights;
Clearing; Semi automatic and presettable tare; Scale switch;
Setting of outputs activation thresholds; Reading/Writing of Alibi
Memory.
DGT100BC and DGT100AN models: Reading of microvolts or ADC
converter for all the channels; Message display; Printing; Setting
of APW in counting mode; Simulation of key pressure; MODBUS serial
protocol.
THROUGH 16 bit ANALOGUE OUTPUT (DGT100AN):
Analogue output proportional to the net or gross weight, either
positive (in loading) or negative (in unloading).
DGT100R REPEATER FUNCTIONS
Version with specific program for using the indicator as a
universal weight repeater or as a multi-scale repeater (MASTER) in
combination with DFW/DGT/MCW.
FUNCTIONING MODES:
- Multi-scale repeater (MASTER):
function which allows to repeat up to 32 independent scales, with
the possibility of managing their functions, or displaying and
printing the sum of the weighs of all the scales.
- UNIVERSAL weight repeater:
function which allows to repeat the weight of any scales, through
the configuration of the input string.
Weight Indicators Controller Available versions
| Code | Description |
 | DGT100BC-1 | Weight indicator with 100mm LED display. IP68 stainless steel case,
5-key keypad, and air valve for regulating the humidity and the
pressure. |
| DGT100AN-1 | Weight indicator with 100mm LED display and analogue output. IP68
stainless steel case, 5-key keypad, and air valve for humidity and
pressure regulation. |
| DGT100PB-1 | Weight indicator with 100mm LED display and Profibus. IP68
stainless steel case, 5-key keypad, and air valve for regulating
the humidity and the pressure. |
| DGT100R-1 | Weight repeater with 100mm LED display. IP68 stainless steel case,
5-key keypad, air valve for regulating the humidity and the
pressure. |
