"DGTP": PANEL DIGITAL WEIGHT TRANSMITTER/ Weight Indicators
Controller
Multipurpose weight transmitter for panel mounting. Ideal as a
microcontroller in industrial weighing and dosage systems making an
easier and safer integration of the weighing to any automation
system. Fitted with 4 inputs and 6 outputs, programmable. Wide
range of available interfaces.
MAIN FEATURES
Easy to use 5-key waterproof keyboard.
Highly efficient red LED display with 6 20-mm digits and 6 LEDs for
showing active functions.
Case for panel mounting. Dimensions: 143,5 x 72 x 129mm(lxhxw).
Drill template: 136,5 x 67,5 x 140mm (lxhxw).
A/D 24-bit sigma-delta conversion, up to 200 conv./sec. autoselect.
Management of a digitally equalised 4-cell weighing system or
management of 4 independent weighing systems.
Connectable with up to 16 analogue load cells with 350 Ohm input
resistance.
Up to 1.000.000 displayable divisions with internal resolution up
to 3.000.000 points.
Calibration, Set-Up parameters, configurable from keyboard or from
PC with DINI TOOLS.
Up to 8 signal linearization points with DINITOOLS (3 from keypad).
Fitted real time clock.
From 12 Vdc to 24 Vdc power supply.
MAIN CERTIFICATIONS
EU Type Examination Certificate (45501:2015)
OIML R76
OIML R61 - MID
OIML R51
I/O SECTION
1 RS232/C or RS485 bidirectional port configurable for connection
to PC or external units.
1 RS232/C bidirectional port configurable for connection to
printer.
PROFIBUS serial interface (DGTPPB model).
6 photomosfet outputs: 150 mA 48 Vac / 150 mA 60 Vdc (NO), with
configurable functions.
4 optoisolator photocouplers inputs: 12÷24 Vdc, 5 mA min - 20 mA
max, with configurable functions.
16-bit analogue output (DGTPAN model) 4-20mA / 0-5Vdc / 0-10Vdc at
choice. Maximum load applicable on the output current: 350Ohm.
Minimum load applicable on the output voltage: 10kOhm.
TRANSMITTER / INDICATOR: FUNCTIONS
THROUGH KEYBOARD:
Zeroing; Semi automatic and presettable tare, print and/or data
transmission; ON/Stand-by.
SELECTABLE:
High Resolution Weighing x 10; Net/Gross or lb/kg conversion;
Weighs totalisation; Formulation; Counting; In/Out Truck weighing;
Hold e Peak.
EXTERNAL INPUT:
Simulation of key pressure; Keyboard lock.
MOSFET OUTPUT:
Set Point Control on the weight, either positive (in loading) or
negative (in unloading), or on the pieces (counting mode), with
programmable enabling/disabling thresholds, as direct check or upon
weight stability.
SERIAL PORTS:
On all models: Reading of the net, gross, and tare weights;
Clearing; Semi automatic and presettable tare; Scale switch;
Setting of outputs activation thresholds.
DGTP and DGTPAN models: Reading of microvolts or ADC converter for
all the channels; Message display; Printing; Setting of APW in
counting mode; Simulation of key pressure; MODBUS serial protocol.
THROUGH 16 bit ANALOGUE OUTPUT (DGTPAN):
Analogue output proportional to the net or gross weight, either
positive (in loading) or negative (in unloading).
MASTER/REPEATER OPTION (MSTSLV code)
Specific programme for use of the indicator as a universal weight
repeater or as a multi-scale repeater (MASTER) in combination with
DFW/DGT/MCW.
FUNCTIONING MODES:
Multi-scale repeater (MASTER)
function which allows to repeat up to 32 independent scales, with
the possibility of managing their functions, or displaying and
printing the sum of the weighs of all the scales.
UNIVERSAL weight repeater
function which allows to repeat the weight of any scales, through
the configuration of the input string.
Click to learn more.
Weight Indicators Controller Available versions
| Code | Description |
 | DGTP | Indicator for panel mounting with 4 IN and 6 OUT. 5-key keypad, LED
display, and standard weighing program. |
| DGTPAN | Indicator for panel mounting with 4 IN, 6 OUT, analogue output.
5-key keypad, LED display, and standard weighing program. |
| DGTPPB-1 | Indicator for panel mounting with 4 IN, 6 OUT, Profibus. 5-key
keypad, LED display, and standard weighing program. |
