AB31 CKD Type Direct Acting 2-Port Solenoid Valve Single Unit Brass
General Purpose Valve
Power:Solenoid
Media:Air, Water, Oil, Gas
Port Size:1/8'' to 2''
Function:2/2 Way, Normally Closed / Normally Open
Operation:Direct Acting
Body Material:Brass
Seal Material:NBR, EPDM, FKM, Si
Medium Temperature:-10 to +60℃
Electrical Connector:DIN 43650 Connector, Wire Leads
Voltages:12V DC, 24V DC, 24V DC, 110V AC, 220V AC
Orifice Size (mm):1.5, 2, 3, 3.5, 4, 5, 7, 10
Dimension of CKD Type AB31 Series Solenoid Valve:
Technical Data:
Model | Action | Port Size | Orifice Size | Max. Working Pressure Differential (MPa) | Fluids Temperature |
AB31-01-1 | 2/2 Way, Normally Closed | 1/8'' | 1.5 | 1 to 2.5 | -10 to +60℃ (184℃ for steam) |
AB31-01-2 | 2.0 | 1 to 1.5 |
AB31-01-3 | 3.0 | 0.5 to 1 |
AB31-01-4 | 3.5 | 0.4 to 0.6 |
AB31-01-5 | 4.0 | 0.25 to 0.4 |
AB31-01-6 | 5.0 | 0.15 to 0.2 |
AB41-02-1 | 1/4'' | 1.5 | 1 to 5 |
AB41-02-2 | 2.0 | 1 to 3 |
AB41-02-3 | 3.0 | 0.9 to 1.5 |
AB41-02-4 | 3.5 | 0.6 to 1.2 |
AB41-02-5 | 4.0 | 0.5 to 1 |
AB41-02-6 | 5.0 | 0.25 to 0.6 |
AB41-02-7 | 7.0 | 0.1 to 0.25 |
AB41-03-7 | 3/8'' | 7.0 | 0.1 to 0.25 |
AB41-03-8 | 10.0 | 0.05 to 0.1 |
AB41-04-8 | 1/2'' | 10.0 | 0.05 to 0.1 |
Brando Factory Production of Brass Solenoid Valves:
Product Features:
1. AB31 series is direct, multiplex, connected diaphragm,
conductive and normally closed (NC) 2/2 way solenoid valve;
2. Able to be operated directly under low pressure;
3. Availability of fluid type:water, air, light oil;
4. Diaphragm accept for customization NBR, FKM, Silicone and EPDM.
5. The AB31 Series is an NC 2-port solenoid valve. The body and
sealant materials are combined according to the working fluid, and
the orifice and pressure are selected according to the relation of
the required flow rate and pressure. The coil specifications are
determined according to the fluid temperature and ambient
conditions, allowing the optimum valve to be selected.
6. The dimensions are the same for port sizes of G and NPT threads.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any problem and inquiry!
