1. Using the new clamping system with double crank four
tie-bars,the cross balanced fixed glide.
2. The seal,the stretch use the parallel bars union and combined
design,which is advantageous to the product formation.
3. The advanced air course design,the single-channel or
single-channel air admission;low pressure for clamping,sealing and
stretching;the high pressre for blowing the bottle.
4. PLC control system,the operaton is easy.
5. With infrared heating,controllable constant pressure
control,frequency conversion,thus achieves blows the perfect
bottle.
5 gallon water bottle making machine main Parameter:
| Type | FP-120 |
| output | According to bottle type | 150PCS/H |
| Product species | Bottle diameter | 150mm-300mm |
| bottle height | 250mm-550mm |
| Bottle mouth diameter | 15mm-100mm |
| mould | cavity | 1cavities |
| mould thickness | 200~450mm |
| Effective area of mold | 600*600mm |
| main power | Power | 380v 4Phase /220v 2Phase 50/60HZ |
| install power/actual power | 26kw/11kw |
| High pressure air compressor | 1.2m3/min 3.0MPa |
| Cold dry machine | 2.0m3/min 3.0MPa 1set |
| cooling water | Cooling water quantity | 15L/min |
| Main machine size | Length width height/weight | 2150*730*1700mm/950kg |
| Oven size | Length width height /weight | 2450*680*1580mm/650kg |
Unique heating system, accurate temperature control and easy
adjustment.
High pressure air compressor
Air compressor system, tie-in use combination series high pressure
gas system. Convenient maintenance, easy inspection and
troubleshooting.
Bottle Mold
Can customize bottles of different sizes and different shapes.
