Yellow Vertical Lifting Materials Construction Hoist Elevator
Construction Hoist Elevator Introduction
Construction lifter/material hoist is the special machine for
vertical lifting materials, it is widely used in building
construction, industrial and mining enterprises, multi-layer
workshop, warehouse, dock, station and other places, have a smooth
efficient convenience, safety, etc.
This construction lifter/material hoist set broken rope dock safety
device, safety device, the buffer device, height and up and down
limit stop, rope locking device safety protection devices, etc.
Construction Hoist Elevator Features and Advantages
* Applying non-eccentric rollers, make the installation of
construction site elevators be faster and easier, with much less
error.
* The integrated elevator car roof, which made by a steel plate
with edges fully welded one time to complete, enhance hoist cage
strength and ensure no water leakage.
* Easy access to electrical panels of elevator for maintenance
* Certified safety braking system of rack and pinion hoist.
* The material elevator car frame is enlarged and strengthened.
* The hoist elevators are equipped with full set of safety
facilities, including centrifugal brake, limit switches,
Electromechanical interlocks.
* Frequency control unit (FC), with closed-loop, which gives the
passenger and material hoists very smooth starting and stopping
with low starting current and less wear and tear.
Construction Hoist Elevator Specification
| Technical Data | KP-B09, KP-B10 Construction Hoist Elevator |
| Payload capacity | 2,000 kg |
| Lifting speed | 0–60 m/min. |
| Max. lifting height | 450 m |
| Cage width (internal) | 1.5 m |
| Cage length (internal) | 3.2 m |
| Cage height (internal) | 2.35 m |
| Motor control | FC control |
| Engine power | 2x23 kw/87Hz |
| Gearbox | Helical reducer |
| Anti-drop Safety Device | centrifugal brake |
| Power supply range | 380–500 V, 50 or 60 Hz, 3 phase |
| Mast section | Square column 650*650*1508 mm with bolted rack |
| Rack module | 8 |
